RBC Bearings 3/4"-ID NEEDLE BEARINGS RBC SJ-7154
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
-
BrandRBC®
-
UPC637400014179
-
Manufacturer Part NumberSJ7154
-
CountryUSA
-
Load Capacity8700 lb
-
Cage MaterialSteel
-
Temperature Rating-40 to 300 deg F
-
Maximum Speed17000 rpm
-
Closure TypeOpen
-
TypeHeavy Duty
-
Width1 in
-
SeriesPitchlign® SJ Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter1-1/4 in
-
Bore Diameter3/4 in
- Long life, caged roller bearing
- Rollers guided by cage for reduced misalignment and reduced friction
- Precision ground on all surfaces
- Compact design allows for high load capacity and small cross section
- Unsealed design for maximum capacity
- 6000 lb dynamic/8700 lb static
-
UNSPSC31171512
-
Package Description1/PK
-
Standards/ApprovalsASPR|CAS|DFAR|FAR Standards|MS51961
-
Warranty90 Days
-
Catalog
Recently Viewed
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
1 -MALE PIPE THREAD METAL BLACK PLUG
The Gold Standard™ of concrete placers. This placer features a strong, lightweight aluminum head. The 19-1/2 x 4 in blade is angled with an optimal curve to easily push and pull material into place as the user spreads and levels concrete. The head provides a strong wide base for moving wet concrete. The blade is welded to the handle for additional toughness. Two aluminum braces connects the blade and handle for extra strength when moving material. A 60 in gold anodized aluminum handle with textured foam grip completes the tool. A 1-3/8 in Dia handle is lightweight and easy to grasp. The handle is anodized to prevent hands from turning black from oxidation. The bright gold is easy to see on the jobsite. Proudly made in the USA. Kraft Tool Co.® has been an American manufacturer of quality hand tools for the concrete, masonry, asphalt, plaster, drywall, tile, floor covering and leveling trades for over 35 years.
Sealmaster® 1440300000 ARE 3-Piece Extra Capacity Precision Rod End Bearing, 0.19 in Dia Bore, 5/8 in OD, 2850 lb Static Load, Alloy Steel
Sealmaster® 3-piece rod ends incorporate a 1-piece race formed around a hardened steel chrome plated ball in a controlled manufacturing process. 3-piece construction offers flexibility for alternative race materials designed to help solve specific application problems.
GearWrench® 83527 Long Arm Magnetic Hex Key Set, 31 Pieces, 0.05 to 3/8 in, 1.5 to 10 mm Hex, T15 to T50 Torx, Ball End Torx® Drive, ASME, Alloy Steel
The GEARWRENCH 31 piece SAE/metric/Torx® magnetic ball end master hex key set includes hex keys made from alloy steel to deliver maximum strength and resist rotational distortion. A magnetic end keeps the key attached to the fastener in tough conditions, and ball end design provides increased access with an entry angle of 25 degrees.
1-1/2" X 48 AISI-1018" KEYED SHAFT-FLS11/2X4 >
