RBC Bearings 2"-OD SEALED YOKE ROLLERS RBC Y-64-L
RBC® Y64L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/8 in Dia Bore, 2 in Dia x 1-1/4 in W Roller, 21200 lb Load, Chrome Steel Roller
-
BrandRBC®
-
UPC637400008710
-
Manufacturer Part NumberY64L
-
CountryUSA
-
Load Capacity21200 lb
-
Temperature Rating0 to 250 deg F
-
FinishBlack Oxide
-
Maximum Speed1570 rpm
-
Closure TypeDouble Seal
-
TypeYoke
-
Roller Diameter2 in
-
Roller MaterialChrome Steel
-
Roller Width1-1/4 in
-
SeriesUniversal Series™
-
Bore Diameter5/8 in
-
Overall Width1-5/16 in
- Yoke type design allows for clevis mounting which provides support on both sides of the cam follower and permits use of a high strength pin
- Designed for moderate loads
- Double sealed to keep grease in and contaminants out
- 9600 lb dynamic/21200 lb static
- Flat outside ring
- Without stud
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
RBC® Y64L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/8 in Dia Bore, 2 in Dia x 1-1/4 in W Roller, 21200 lb Load, Chrome Steel Roller
WD-40® SPECIALIST® 300400 Heavy Duty Extreme Pressure Grease, 14 oz Cartridge, Red, 0 to 620 deg F
WD-40® SPECIALIST® HEAVY-DUTY EXTREME PRESSURE GREASE gives surfaces the protection they need against wear and high loads. Effective at up to 600deg F, it's the solution of choice for a wide variety of applications, including heavy-duty automotive, farming, construction and industrial equipment, as well as boat-trailer and similar wheel bearings.
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
RBC® has been a pioneer in spherical plain bearing technology since inventing the fractured outer race design many years ago. Since that time, RBC® has continued to introduce industry leading innovations such as high misalignment, angular contact, extended inner ring, tapered bore, and extended lubrication groove spherical plain bearing designs.
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
