SPRAY-ON 10-OZ AEROSOL SILICONE LUBRICANT SPR 00206
Sprayon® S00206000 LU™206 All-Purpose Light Pressure Silicone Lubricant, 16 oz Aerosol Can, Liquid Form, Clear Glass, -50 to 550 deg F
-
BrandSprayon®
-
UPC075577902064
-
Manufacturer Part NumberS00206000
-
CountryUSA
-
Temperature Range-50 to 550 deg F
-
Flammability Rating4
-
Flash Point-20.2 deg F
-
FormLiquid
-
ColorClear Glass
-
TypeAll-Purpose Light Pressure
-
CompositionHexane, 2-Methylpentane, Propane, 3-Methylpentane, 2,3-Dimethylbutane, Cyclohexane, 2,2-Dimethylbutane
-
VOC Content0.0094
-
Viscosity<7 cSt
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight10 oz
-
SeriesLU™206
-
Base TypeSilicone
-
Specific Gravity0.65
-
Odor/ScentMild Solvent
- Improves high speed production
- Paintable
- Retards oxidation and corrosion
- Contains 5% silicone lubricant and can spray in any direction, including upside down or sideways
- The formula reduces squeaks, sticking, friction and repels water
- It lubricates and protects metal, wood, most plastics and rubber against corrosion
- Does not interfere with painting operations
- Compatible with most surfaces
- Penetrant, water displacer
- Rust inhibitor
- Improves high speed production
- 3 years shelf life
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1HFY5 |
-
UNSPSC15121520
-
Package Description12/PK
-
Standards/ApprovalsOSHA 1910.94/1910.107
-
SDS
Recently Viewed
Sprayon® S00206000 LU™206 All-Purpose Light Pressure Silicone Lubricant, 16 oz Aerosol Can, Liquid Form, Clear Glass, -50 to 550 deg F
NO-BOOM DUAL NOZZLE 2-GPM BOOM KIT - VALSSBKDNB2>
Weiler® 17906 Concave Wheel Brush, 2 in Dia Brush, 0.008 in Dia Crimped Filament/Wire
Weiler® 17906 Concave Wheel Brush, 2 in Dia Brush, 0.008 in Dia Crimped Filament/Wire
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
The United Abrasives/SAIT Saitech Steel Worker® Chop Saw Wheels are manufactured with premium ceramic grain for extremely fast, burr-free cutting. United Abrasives/SAIT wheels are constructed using the highest quality fiberglass to withstand the toughest applications. Proudly manufactured in the USA.
6898CGL 6898CG General Purpose Gloves, Knit, L, Polyurethane Palm, 13 ga Polyester, Gray, Resists: Abrasion/Snag/Tear
6898CGL 6898CG General Purpose Gloves, Knit, L, Polyurethane Palm, 13 ga Polyester, Gray, Resists: Abrasion/Snag/Tear
