Weiler® 17906 Concave Wheel Brush, 2 in Dia Brush, 0.008 in Dia Crimped Filament/Wire
Weiler® 17906 Concave Wheel Brush, 2 in Dia Brush, 0.008 in Dia Crimped Filament/Wire
-
BrandWeiler®
-
UPC012382179069
-
Manufacturer Part Number17906
-
CountryUSA|Canada
-
Filament/Wire Diameter0.008 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed20000 rpm
-
Trim Length1/2 in
-
TypeConcave
-
Attachment TypeStem
-
Shank Diameter1/4 in
-
Brush Diameter2 in
- Saucer-shaped radial wheels permanently mounted on a 1/4 in stem to provide flexible brushing action for addressing corners and hard-to-reach areas
- Crimped wire wheels with a permanently-attached 1/4 in stem or shank are primarily intended for use on high speed die grinders
- Although they can also be mounted onto a drill, the speed and power of that tool will light weight the effectiveness of the brush
- Featuring Weiler's solid ring construction, these radial wheels are available in heat-treated steel, type 302 stainless steel and brass wire
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 38P656 |
| MSC | 77738755 |
| Fastenal | 0813730 |
-
UNSPSC31171805
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|CSA Approved
Recently Viewed
Weiler® 17906 Concave Wheel Brush, 2 in Dia Brush, 0.008 in Dia Crimped Filament/Wire
Weiler® 17906 Concave Wheel Brush, 2 in Dia Brush, 0.008 in Dia Crimped Filament/Wire
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
The United Abrasives/SAIT Saitech Steel Worker® Chop Saw Wheels are manufactured with premium ceramic grain for extremely fast, burr-free cutting. United Abrasives/SAIT wheels are constructed using the highest quality fiberglass to withstand the toughest applications. Proudly manufactured in the USA.
6898CGL 6898CG General Purpose Gloves, Knit, L, Polyurethane Palm, 13 ga Polyester, Gray, Resists: Abrasion/Snag/Tear
6898CGL 6898CG General Purpose Gloves, Knit, L, Polyurethane Palm, 13 ga Polyester, Gray, Resists: Abrasion/Snag/Tear
Kuri Tec® SJMD200x100 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 100 ft L, 150 psi Working, Rubber/Polyester, Import
Luminator® Hi-Visibility Rain Gear .40mm PU / Cotton Poly Blend Stretch Fabric 2 Piece Hi Vis Reflective Rain Suit Meets ANSI/ISEA 107 2020 Standard Type R Class 3 Compliant Stretch fabric moves with you for a more comfortable fit For those applications where being seen is of the utmost importance, MCR Safety's Luminator® Series offers you a variety of high visibility garments made in different colors and different options of reflective material. The 5182 is a fluorescent lime 2 pc suit made up of a rain jacket with attached hood and elastic waist pants. It features 2-inch silver reflective stripes and meets or exceeds ANSI/ISEA 107 2020 Class 3 high visibility standards. The jacket has a zipper front with storm flap, 2 front patch pockets, and elastic inner cuffs in the sleeves. The pants feature a drawstring elastic waist and have expandable ankle gussets. This garment is treated to be limited flammability and has been tested in accordance with the ASTM D-6413 test method. If you are looking for the best rainwear options, look no further than MCR Safety! This garment is not flame resistant as defined by ANSI/ISEA 107 Section 10.5.
