Results 1 - 13 of 13
Grid
My Wishlist
Compare

130-16 AMREP

Silicone Lubricants
$6.70

PROTECTS ALL-MIS13016>

My Wishlist
Compare

324-16 MISTY

Silicone Lubricants
$6.91

SPRAY SILICONE-MIS32416>

B'laster® 16-SL Silicone Lubricant, 11 oz Container Aerosol Can Container, Gas/Pressurized Liquid Form, Clear, -20 to 250 deg F

Specially formulated to lubricate, waterproof and protect electrical components. Meets FDA Regulation CFR 21-178.3570 for incidental food contact. NSF H1 Registered.

Silicone fluid with superior lubrication and temperature viscosity characteristics. Use on all metallic and non-metallic surfaces. Reduces friction and galling even on metal-to-metal contact areas.

Multi-purpose food grade silicone spray for food processing and handling applications. Forms a colorless, odorless, non-staining film. Eliminates binding and sticking in most metal to non-metal applications. Meets FDA Regulation CFR 21-178.3570. NSF H1 Registered.

Multi-purpose silicone spray for food processing and handling applications. Forms a colorless, odorless, non-staining film. Eliminates binding and sticking in most metal to non-metal applications. Meets FDA Regulation CFR 21-178.3570. NSF H1 Registered.

This silicone lubricant leaves a clear residual dry film that helps to prevent sticking without transferring to the surface. Slower dry allows full penetration into rubber surfaces.

Liquid Wrench® CERFLON® M914 Heavy Duty Silicone Lubricant, 11 oz Aerosol Can, Aerosol Can/Liquid Form, Pale Yellow

Sprayon® S00206000 LU™206 All-Purpose Light Pressure Silicone Lubricant, 16 oz Aerosol Can, Liquid Form, Clear Glass, -50 to 550 deg F

WD-40® 300012 Water Resistant Silicone Lubricant, 11 oz Aerosol Can, Liquid Form, Clear Glass, -100 to 300 deg F

Recently Viewed

My Wishlist
Compare

1205796 SEQUOIA

ROOFING NAILS
$165.83

50-LB 1" E/G ROOFING NAILS--715247-SEQ1205796 >

Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).

Diablo® DHS17SPL Hole Saw Set, 17 Pieces, For Use With Plumbers

Selkirk® by Duravent 187706 RV Adjustable Wall Thimble, 10-3/4 in Dia, Steel, Galvanized, Domestic

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu