Kuri Tec® SJMD200x100 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 100 ft L, 150 psi Working, Rubber/Polyester, Import
Kuri Tec® SJMD200x100 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 100 ft L, 150 psi Working, Rubber/Polyester, Import
-
BrandKuri Tec®
-
UPC822353062517
-
Manufacturer Part NumberSJMD200x100
-
CountryUSA
-
Temperature Rating-25 to 185 deg F
-
MaterialRubber/Polyester
-
SeriesSJMD
-
Working Pressure150 psi
-
Inside Diameter2.126 in
-
Domestic/ImportImport
-
Length100 ft
-
End StyleHose
- Flat hose design rolls up into tight coils for easy storage and transport, takes up less space than other hoses
- Double and single jacket options available with a double jacket for additional external abrasion resistance
- Red stripe indicates single jacket version, blue stripe indicates double jacket version
- Hoses are individually packaged in cartons for ease of handling and shipping
- Versatile natural rubber tube exhibits a good combination of strength and extreme flexibility for ease-of-use
- Hose may be used in a wide range of service temperature ranges from minus 25 to plus 185 deg F
-
Package DescriptionEACH
-
Catalog
-
Specification Sheet
Recently Viewed
Kuri Tec® SJMD200x100 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 100 ft L, 150 psi Working, Rubber/Polyester, Import
Kuri Tec® SJMD200x100 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 100 ft L, 150 psi Working, Rubber/Polyester, Import
MORSE® 57271 5946 Center Cutting Double End Stub Length End Mill, 3/32 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 57271 5946 Center Cutting Double End Stub Length End Mill, 3/32 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 43282 1895 Double End Non-Center Cutting Regular Length End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Bright
MORSE® 43282 1895 Double End Non-Center Cutting Regular Length End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Bright
Kuriyama KBEE200X30 KBEE Standard Duty Wastewater Hose, Hose End Style, 30 ft L, 15 psi Working, Polyethylene, Domestic
GENERAL APPLICATIONSPumps, rental and construction dewateringPumps, trashSeptic and wastewater handlingWater suction - standard dutyCONSTRUCTIONFlexible polyethylene (LDPE) tube with polyethylene (LDPE) ribs and cuffed ends.SERVICE TEMPERATURE RANGE-40°F (-40°C) to +150°F (+65°C) Actual service temperature range is application dependent.FEATURES AND ADVANTAGESSuperior Flexibility! - Corrugated tube and ribs provides high flexibility, perfect for maneuvering in tight areas such as portable toilets."Cold-Flex" Materials - Hose remains flexible in sub-zero temperatures.Crush Resistant - Will spring back to original shape after being crushed, will not kink!Easy Slide Helix - Exposed ribs protect hose tube from cover wear, and allow hose to slide easily over rough surfaces. Easy-to-handle.Leak Proof Cuffs - Overmolded cuffs eliminate leaking and will not separate from the hose. Each cuff and unit is 100% factory tested.Additional Cuffs - Additional 2" and 3" cuffs are available for making hose repairs and custom lengths.
MORSE® 44571 4581 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 44571 4581 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 44173 4551 Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 44173 4551 Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
