Koyo Bearing METRIC TAPERED ROLLER BEARING SETS KOY 30213-JR
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790020049
-
Manufacturer Part Number30213JR
-
CountryUSA
-
Load Capacity128 kN Dynamic/156 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed3200 rpm Grease/4300 rpm Oil
-
TypeCaged
-
Width24.75 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter120 mm
-
Bore Diameter65 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
3-GRV 3-V-BELT QD SDS-BUSH SHEAVES IDC 3/3-V-0450-SDS
3 GROOVE 3-V-BELT QUICK DISCONNECT SDS-BUSH SHEAVES
Dixon® WB1 King Cable™ Hose Cable, 1/8 in, 20-1/4 in L, 200 psi, Carbon Steel, Domestic
Dixon® WB1 King Cable™ Hose Cable, 1/8 in, 20-1/4 in L, 200 psi, Carbon Steel, Domestic
Browning® 1077411 QD Bushing, 2-5/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
RIDGID® 33927 345/150DL Manual Flare Tool, 3/16 to 5/8 in Nominal, Sliding T-Handle Handle
RIDGID® 33927 345/150DL Manual Flare Tool, 3/16 to 5/8 in Nominal, Sliding T-Handle Handle
Dichtomatik N70450 O-Ring, 450 Dash Number, 10.475 in ID x 11.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
