Beam Clamp Anchor Clips
10-82571 CROSBY 8.5-TON SHACKLE PINS
The CROSBY 1082571 is an 8.5-ton shackle pin designed for Crosby G4075 series slng shackles
BAND-IT J306 1-3/4" X 5/8" GALVANIZED CLAMPS
PREFORMED JR SMOOTH ID CLAMP, 5/8" WIDE, 0.0300" THICK, 316 STAINLESS STEEL
BAND-IT J307 2" X 5/8" GALVANIZED CLAMPS
JUNIOR 2" X 5/8" WIDE X 0.030" THICK, 2" DIAMETER
G-209-1-1/2 CROSBY1-1/2" 17-TON SHACKLES
The Crosby G-209 1-1/2" is a heavy-duty, hot-dip galvanized carbon steel screw pin anchor shackle featuring a 17-ton Working Load Limit (WLL) and Crosby's signature Red Pin®.
G-209-1-1/4 CROSBY 1-1/4" 12-TON SHACKLES
Working Load Limit: 12 tons
Safety Factor: 6:1
Inside Width: 3.26"
Inside Height: 4.69"
Mouth Width: 2.03"
Shackle Size: 1-1/4"
Pin Size: 1-3/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Screw Pin Anchor
Product Weight: 9.5 lbs.
Standards: Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C-271, & ASTM A148M.
G-209-1-1/8 CROSBY 1-1/8" 9.5-TON SCHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin
G-209-1-3/4 CROSBY 1-3/4" 25-TON SHACKLES
The Crosby G-209 1-3/4" is a heavy-duty, galvanized carbon steel screw pin anchor shackle featuring a Working Load Limit (WLL) of 25 tons (55,000 lbs). Manufactured by Kito Crosby in the USA, this rigging component is widely considered the industry standard for demanding lifting, tie-down, and towing applications
G-209-1-3/8 CROSBY 1-3/8" 13.5-TON SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
G-209-1/2 CROSBY1/2"2-TON SCREW-PIN SHACKLE
The Crosby G-209 1/2" is a hot-dip galvanized carbon steel screw pin anchor shackle featuring a 2-ton Working Load Limit (WLL) and a distinct Red Pin®. It is the industry standard for overhead lifting, towing, and everyday rigging applications.
G-209-1/4 CROSBY1/4" 1/2-TON SP SHACKLES
The Crosby G-209 1/4" is a premium, high-strength screw pin anchor shackle designed for quick, temporary connections in tie-down, towing, suspension, or lifting applications. It features an industry-standard 0.5-ton (1,100 lbs) working load limit (WLL) and is instantly recognizable by Crosby's trademark Red Pin®
G-209-2-1/2 CROSBY MATERIAL HANDLING GROUP 2-1/2" 55-TON SHACKLES
The Crosby G-209 2-1/2" Screw Pin Anchor Shackle is a heavy-duty, forged steel rigging component with a 55-ton Working Load Limit
G-209-3/16 CROSBY 3/16" 3/10-TON SHACKLES
The Crosby G-209 3/16" is a high-quality screw pin anchor shackle manufactured by Kito Crosby. This industry-standard hardware piece is forged, quenched, and tempered from high-strength carbon steel, featuring a distinct alloy steel "Red Pin" for quick identity confirmation. It is specifically built for quick, temporary connections in dynamic overhead lifting, tie-down, towing, or suspension environments.
G-209-3/4 CROSBY 3/4" 4-3/4-TON SHACKLES
The Crosby G-209 3/4" is a premium, hot-dip galvanized screw pin anchor shackle manufactured by Kito Crosby. Widely considered an industry standard for rigging, towing, and overhead lifting, this specific model features the iconic Red Pin® as a hallmark of genuine manufacturing quality.
G-209-3/8 CROSBY 3/8" 1-TON ANCHOR SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
G-209-5/16 CROSBY 5/16" 3/4-TON SHACKLES
The Crosby G209 5/16" is a hot-dip galvanized carbon steel screw pin anchor shackle with a Working Load Limit (WLL) of 3/4 ton (0.75 metric tons / 1,650 lbs). It is a standard for everyday rigging, towing, and temporary lifting application
G-209-5/8 CROSBY 5/8" 3-1/4-TON SHACKLES
The Crosby G-209 5/8" is a heavy-duty, hot-dip galvanized screw pin anchor shackle featuring a 3.25-ton (6,500 lbs) Working Load Limit (WLL). Forged, quenched, and tempered by Kito Crosby, it is a industry-standard rigging component easily identified by its signature Red Pin®
G-209-7/16 CROSBY 7/16" 1-1/2-TON SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin
G-209-7/8 CROSBY7/8" 6-1/2-TON SP SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
G-210-3/8 CROSBY 3/8" 1-TON SHACKLES
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
G-213-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" 2-TON SHACKLES
Working Load Limit: 2 tons
Safety Factor: 6:1
Inside Width: 1.31"
Inside Height: 1.88"
Mouth Width: 0.81"
Shackle Size: 1/2"
Pin Size: 5/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Round Pin Anchor
Product Weight: .7 lbs.
Standards: Meets or exceeds all requirements of Federal Specification RR-C-271 & ASTM A148M.
G-213-1/4 CROSBY 1/4" 1/2-TON SHACKLES
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
G-213-7/8 CROSBY MATERIAL HANDLING GROUP 7/8" 6-1/2-TON SHACKLES
The Crosby G-213 7/8" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle manufactured by Kito Crosby. This specific industrial rigging model features a 7/8-inch nominal body thickness and a 1-inch alloy steel pin secured by a removable cotter pin
G-2130-1-1/2 CROSBY 1-1/2" 17-T ANCHOR SHACKLE
Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—
G-2130-1/2 CROSBY 1/2" 2-TON ANCHOR SHACKLES
1/2" 2-TON-LOAD-CAPACITY (4,000-POUND) BOLT-STYLE ANCHOR SHACKLE
Recently Viewed
5/16" X 5/16" USS SOCKET SET SCREW-HOL32140>
SPRAYER HEADS FOR 32-OZ BOTTLES-CON932H >
5-40" X 3/8" S/H CAPSCREWS-HOL72030>
1/4" -HOSEX5-MALE JIC HYDRAULIC HOSE ENDS-MHDE0405MJ >
MCR Safety 9676L UltraTech® 9676 General Purpose Gloves, Wing Thumb Style, L, Polyurethane Palm, 15 ga Dyneema®, Gray/White, Knit Wrist Cuff, Resists: Abrasion, Cut, Puncture and Tear, HPPE Lining
MCR Safety CutPro® 13-Gauge Dyneema® Diamond Technology Shell Cut Resistant Work Gloves Polyurethane (PU) Coated Palm and Fingertips Micro-particle boosted high strength fiber provides cool-touch comfort and maximum durability One of the most distinguishing characteristics of Dyneema® fiber is its cool-to-touch property. This fiber's inherent ability to dissipate body heat and pass moisture from the inside of the glove to the outside results in longer wear time, promoting greater hand protection. The 9676 features a 13-gauge Certified Dyneema® Diamond Technology shell with a rugged PU coating on the palm and fingertips. The cut-resistant properties of this glove, combined with its outstanding abrasion and puncture resistance, make it an excellent choice for tough jobs. (Vending Packaged option available - VP9676). If you are looking for the best cut-resistant gloves, look no further than MCR Safety's Cut Pro® cut-resistant options.
GP® 4082R Standard Length Socket, 1 in, 2-9/16 in Hex Socket, 6 Points
