G-210-3/8 CROSBY 3/8" 1-TON SHACKLES
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
Recently Viewed
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
G-2130-1/2 CROSBY 1/2" 2-TON ANCHOR SHACKLES
1/2" 2-TON-LOAD-CAPACITY (4,000-POUND) BOLT-STYLE ANCHOR SHACKLE
4" X .012" WIRE WITH 1/4" HEX SHANK COARSE WIRE WHEEL - It's designed for easy access into narrow holes and confined areas. This wire wheel brush features crimped style wire which is ideal for light to medium-duty applications. It removes rust, scale, paint, and weld spatter in hard to reach areas. Designed for use with common 1/4 in diameter electric power drills or pneumatic (air) drills.
1-1/2" X 1/4-SHANK FINE WIRE WHEEL, STEM MOUNTED COARSE WIRE WHEEL BRUSH DESIGNED FOR EASY ACCESS INTO NARROW HOLES AND CONFINED AREAS
Milwaukee® 1676-6 Grounded Heavy Duty Right Angle Drill Kit, 1/2 in Keyed Chuck, 120 VAC, 300 to 1200 rpm Speed, 6-1/2 in OAL
Setting the standard for large hole drilling in tight spaces. The 1/2 in Hole-HAWG® drill delivers power and torque in a compact design that makes it perfect for drilling between studs and joists. The powerful motor features 2-speed ranges plus reverse for increased versatility. The drill offers a 4-5/8 in self-feed bit capacity and an extra long pipe handle to help you control power.
WIRE TERMINALS-DEL492115 >
