G-213-7/8 CROSBY MATERIAL HANDLING GROUP 7/8" 6-1/2-TON SHACKLES
The Crosby G-213 7/8" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle manufactured by Kito Crosby. This specific industrial rigging model features a 7/8-inch nominal body thickness and a 1-inch alloy steel pin secured by a removable cotter pin
Recently Viewed
G-213-7/8 CROSBY MATERIAL HANDLING GROUP 7/8" 6-1/2-TON SHACKLES
The Crosby G-213 7/8" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle manufactured by Kito Crosby. This specific industrial rigging model features a 7/8-inch nominal body thickness and a 1-inch alloy steel pin secured by a removable cotter pin
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
Oatey® 43651 Straight Open Replacement Closet Flange, 4 in Dia Inside, 4 in Pipe, Plastic/PVC
Oatey® Twist-N-Set® Replacement Closet Flanges are designed to replace broken cast iron closet flanges with a gasket that expands to fit inside of service weight, heavy weight and no hub pipe. The replacement flange installs easily without tools and features a smooth, unrestricted flow design. Oatey products have earned the trust of plumbing professionals for over 100 years.
Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—
Working Load Limit: 12 tons
Safety Factor: 6:1
Inside Width: 3.26"
Inside Height: 4.69"
Mouth Width: 2.03"
Shackle Size: 1-1/4"
Pin Size: 1-3/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Screw Pin Anchor
Product Weight: 9.5 lbs.
Standards: Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C-271, & ASTM A148M.
