G-213-1/4 CROSBY 1/4" 1/2-TON SHACKLES
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
Recently Viewed
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
High quality steel material. Zinc plated finish. Size is clearly marked on each piece. Precision Brand® keystock is used to provide driving torque between shafts and pulleys, gears, sprockets, etc. Used for new machinery, general maintenance and shop repairs. It is a necessity in all applications where rotating power devices are used. Most tolerances on dimensions are oversized to assure tight fits in keyways for positive, zero backlash power transmission.
TOOL BRUSH SET-MTB316034930 >
4-OZ HVAC BLUE PIPE JOINT COMPOUND-PEM82480 >
ISOSTATIC™ Oilube® 401484 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 3-1/2 in W
ISOSTATIC™ Oilube® 401484 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 3-1/2 in W
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
