MACHINERY EYE BOLTS WITHOUT SHOULDER
Brand / Manufacturer: Kito Crosby Product Series: G-291 (Regular Nut Eye Bolt without shoulder ) Crosby Stock Number: 1043515Thread / Shank Size: 5/8" - 11 UNC Shank Length: 8.00 inches Working Load Limit (WLL): 5,200 lbs (when used for a straight, in-line pull) Material & Finish: Quenched and tempered forged steel, hot-dip galvanized after threading.
Working Load Limit (WLL): 5,200 lbs (2.6 tons) for secure, in-line pulls. Material: Forged carbon steel, which is quenched and tempered for high structural reliability. Coating: Hot-dip galvanized finish providing robust environmental and rust resistance. Threading: Standard unified coarse threading (UNC). Hardware Included: Shipped complete with a matching, hot-dip galvanized hex nut.
The Crosby G-291 3/4x12 (Crosby Stock Number 1043659) is a premier, heavy-duty Regular Nut Eye Bolt engineered specifically for straight-line, in-line industrial lifting and rigging applications.
Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length
Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
Forged Steel Quenched & Tempered Regular Eye Bolt. Recommended For In-Line Pull. Fatigue Rated At 1-1/2 Times. The WLL at 20000 Cycles. Meets Or Exceeds All Requirements of ASME B30.26
Material: Forged steel, quenched, and tempered. Application: Recommended primarily for straight, in-line pulls. Finish: Hot dip galvanized after threading Safety Factor: Fatigue rated at 1.5 times the Working Load Limit (WLL) for 20,0
89-010 Armstrong Tools 1" X 2-1/2" Lifting Eyes (eye Bolt) Plain
1" X 2-1/2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89010 >
3/4" X 2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89008 >
89-007 Armstrong Tools 5/8" X 1-3/4" Lifting Eyes (eye Bolt) Plain
5/8" X 1-3/4" LIFTING EYES (EYE BOLT) PLAIN PATTERN
1/2" X 1-1/2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89005 >
89-004 Armstrong Tools 7/16" X 1-3/8" Lifting Eyes (eye Bolt) Plain
7/16" X 1-3/8" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89004 >
89-003 Armstrong Tools 3/8" X 1-1/4" Lifting Eyes (eye Bolt) Plain
3/8" X 1-1/4" LIFTING EYES (EYE BOLT) PLAIN PATTERN
89-002 Armstrong Tools 5/16" X 1-1/8" Lifting Eyes (eye Bolt) Plain
5/16" X 1-1/8" LIFTING EYES (EYE BOLT) PLAIN PATTERN
3/8" X 7" HOOK BOLT WITH NUTS-NTL221697 >
5/16" X 5" HOOK BOLT-NTL221689 >
1/2" X 8" ZINC-PLATED EYEBOLT-NTL221531 >
1/2" X 12" ZINC-PLATED EYEBOLT-NTL221341 >
3/8" X 3" ZINC-PLATED EYEBOLT-NTL221259 >
5/16" X 5" ZINC-PLATED EYEBOLT-NTL221234 >
3/16" X 1-1/2" EYEBOLT-NTL221051 >
1/2" X 10" ZINC EYEBOLT-NTL167189 >
1/2" X 6" ZINC PLATED EYEBOLT-NTL167163 >
1/2" X 4" ZINC EYEBOLT-NTL167155 >
1/4" X 6" ZINC EYEBOLT-NTL159897 >
Recently Viewed
#5 KEYED ALIKE #2402 PADLOCK - MAS5KA2402 >
1/2" X 2-1/4" USS SHOULDER BOLTS-HOL08082>
FB-5016 X 1-3/8 Dodge® 99111 Finished Bore Flexible Chain Coupling Flange, 50 Chain, 1-3/8 in Dia Bore, 16 Teeth, 3.91 in OD, 2-1/2 in Dia Hub, Steel
Dodge® 99111 Finished Bore Flexible Chain Coupling Flange, 50 Chain, 1-3/8 in Dia Bore, 16 Teeth, 3.91 in OD, 2-1/2 in Dia Hub, Steel
7-PIECE INSULATED NUT DRIVER SET-GRN02570I>
IDEAL® Noalox® 30-030 Heavy Duty Anti-Oxidant Compound, 8 oz Squeeze Bottle, Paste Form, Gray, 1.04
IDEAL Noalox Anti-Oxidant compound improves efficiency and service life of aluminum electrical applications. Suspended zinc particles penetrate and cut aluminum oxide, while carrier material excludes air to minimize further oxidation. Provides additional inner-strand and inner-conductor current paths for improved conductivity and cooler connections. For use with pressure-type wire connectors including lugs, taps, service entrances and split-bolts. It is used with all types of pressure-type wire connectors. Reduces galling and seizing when applied on aluminum conduit joints promoting good ground continuity.
Replacement bit holder for Klein Tools interchangeable screwdriver and nut drivers. Bit holders work with all Klein Tools 10-in-1, 11-in-1 and 10-Fold Screwdrivers. 2-Piece Set.
