Crosby® 1043597 G-291 Eye Bolt With Regular Nut, 3/4 in, 6 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043597 G-291 Eye Bolt With Regular Nut, 3/4 in, 6 in L Shank, Forged Steel, Hot Dipped Galvanized
-
BrandCrosby®
-
UPC662547435976
-
Manufacturer Part Number1043597
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Length3 in
-
MaterialForged Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
SeriesG-291
-
Working Load7200 lb
-
Shank Length6 in
-
Diameter - Thread Size3/4 in
-
Inside Eye Diameter1-1/2 in
-
Outside Eye Diameter3 in
-
Overall Length9.19 in
- Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
- Hot dip galvanized after threading (UNC)
- Furnished with standard hot dip galvanized hex nuts
- Recommended for in-line pull
- Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
-
UNSPSC31161610
-
Standards/ApprovalsASME B30.26|CE Certified
-
Catalog
Recently Viewed
Crosby® 1043597 G-291 Eye Bolt With Regular Nut, 3/4 in, 6 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043597 G-291 Eye Bolt With Regular Nut, 3/4 in, 6 in L Shank, Forged Steel, Hot Dipped Galvanized
Reelcraft® F7925 OLP F7000 Low Pressure Hose Reel, 3/4 in ID x 1-47/250 in OD x 25 ft L Hose, 50 psi Pressure, 19-3/4 in Dia x 7 in W Reel, Domestic
The Reelcraft® fuel delivery reels are equipped with low temp Buna seals and incorporate metal forms to insure the greatest possible strength and are ideal for mobile and fixed mount applications. These rugged reels are corrosion-resistant and suitable for a wide range of fuels including E85, diesel and gasoline, to name a few.
Crosby® 1043711 G-291 Eye Bolt With Regular Nut, 7/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043711 G-291 Eye Bolt With Regular Nut, 7/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
BBI 500102 Full Thread Tap Bolt, 3/8-16, 2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500102 Full Thread Tap Bolt, 3/8-16, 2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
Morse® 466103 TL Series Torque Limiter, 1-1/8 in Straight Bore, 5 in OD, 35 to 155 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Crosby® 1043515 G-291 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043515 G-291 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
