Crosby® 1043374 G-291-1/2-3-3/4 Eye Bolt With Regular Nut, 1/2 in, 3-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043374 G-291 Eye Bolt With Regular Nut, 1/2 in, 3-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
-
BrandCrosby®
-
UPC662547433743
-
Manufacturer Part Number1043374
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Length1-1/2 in
-
MaterialForged Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
SeriesG-291
-
Working Load2600 lb
-
Shank Length3-1/4 in
-
Diameter - Thread Size1/2 in
-
Inside Eye Diameter1 in
-
Outside Eye Diameter2 in
-
Overall Length5.38 in
- Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
- Hot dip galvanized after threading (UNC)
- Furnished with standard hot dip galvanized hex nuts
- Recommended for in-line pull
- Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
-
UNSPSC31161610
-
Standards/ApprovalsASME B30.26|CE Certified
-
Catalog
Recently Viewed
Crosby® 1043374 G-291-1/2-3-3/4 Eye Bolt With Regular Nut, 1/2 in, 3-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043374 G-291 Eye Bolt With Regular Nut, 1/2 in, 3-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
BBI 699490 Screw
12" OZ GUNK CARURETOR AND FUEL INJECTOR CLEANER-RADM4816 >
Crosby® 1046029 M-279 Full Threaded Machinery Eye Bolt, M24x3, 36 mm L Shank, Forged Steel
Crosby® 1046029 M-279 Full Threaded Machinery Eye Bolt, M24x3, 36 mm L Shank, Forged Steel
