Crosby® 1043515 G-291-5/8 X 8 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043515 G-291 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
-
BrandCrosby®
-
UPC662547435150
-
Manufacturer Part Number1043515
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Length3 in
-
MaterialForged Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
SeriesG-291
-
Working Load5200 lb
-
Shank Length8 in
-
Diameter - Thread Size5/8 in
-
Inside Eye Diameter1-1/4 in
-
Outside Eye Diameter2-1/2 in
-
Overall Length10.69 in
- Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
- Hot dip galvanized after threading (UNC)
- Furnished with standard hot dip galvanized hex nuts
- Recommended for in-line pull
- Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
-
UNSPSC31161610
-
Standards/ApprovalsASME B30.26|CE Certified
-
Catalog
Recently Viewed
Crosby® 1043515 G-291-5/8 X 8 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043515 G-291 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Linn 20FS30 Rough Bore Spur Gear, 20 Diametral Pitch, 14.5 deg Pressure Angle, 3/8 in W Face, 30 Teeth, 1-1/2 in Dia Pitch, 3/8 to 3/4 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
20-Q-25-L-56 Dodge® Tigear-2® 20Q25L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 1.11 hp, 25:1 Gear, 70 rpm Maximum Output, 788 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
Crosby® 1010676 Fist Grip® G-429-13/8 Wire Rope Clip, 1-3/8 to 1-1/2 in, Forged Steel, 5 Clips, 78 in Rope Turn Back
Crosby® 1010676 Fist Grip® G-429 Wire Rope Clip, 1-3/8 to 1-1/2 in, Forged Steel, 5 Clips, 78 in Rope Turn Back
Crosby® 1010532 Fist Grip® G-429-1/2 Wire Rope Clip, 7/16 to 1/2 in, Forged Steel, 3 Clips, 11 in Rope Turn Back
Crosby® 1010532 Fist Grip® G-429 Wire Rope Clip, 7/16 to 1/2 in, Forged Steel, 3 Clips, 11 in Rope Turn Back
LARGE INDUSTRY GRADE STRAIGHT THUMB LEATHER DRIVERS GLOVES - GLV3203L>
