MACHINERY EYE BOLTS WITHOUT SHOULDER
1/4" X 5" ZINC EYEBOLT-NTL159889 >
Recently Viewed
FYH® NA211 34 NA Series Cylindrical Insert Bearing, 2-1/8 in Dia Bore, 2.81 in W, 43.4 kN Dynamic/29.4 kN Static Load
FYH® NA211 34 NA Series Cylindrical Insert Bearing, 2-1/8 in Dia Bore, 2.81 in W, 43.4 kN Dynamic/29.4 kN Static Load
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
The Crosby G-209 1/4" is a premium, high-strength screw pin anchor shackle designed for quick, temporary connections in tie-down, towing, suspension, or lifting applications. It features an industry-standard 0.5-ton (1,100 lbs) working load limit (WLL) and is instantly recognizable by Crosby's trademark Red Pin®
LUFKIN Mezurallâ„¢ W9212 Measuring Tape, 12 ft L x 1/2 in W Blade, Steel Blade, Feet and Inches to 1/16th Top Edge, Inches to 1/16th Bottom Edge, First 12 in to 1/32nds Graduation
Crescent Lufkin® Mezurall series tape measures are built with durability and comfort in mind. Featuring a compact and sturdy chrome case, these tape measures fit easily into pockets or travel bags.
Koyo 47820 Cylindrical Bearing Cup, 146.05 mm OD, 26.195 mm W Cup, 33.338 mm W Bearing, 140 mm Dia Max House Shoulder
2-1/2" X 48 ANSI-1018" KEYED SHAFT-FLS21/2X4 >
