Conduit Elbows
Southwire® 1046TZ Schedule Plain End Elbow, 2 in Trade, 90 deg, PVC
Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 90° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”
Southwire - Topaz 86 Conduit Elbow, 2 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 85 Conduit Elbow, 1-1/2 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 83 Conduit Elbow, 1 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 82 Conduit Elbow, 3/4 in Trade, 90 deg, Steel, Galvanized
Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.
Southwire - Topaz 68 Conduit Elbow, 3 in Trade, 90 deg, Steel, Galvanized
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 66 Conduit Elbow, 2 in Trade, 90 deg, Steel, Galvanized
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 63 Threaded Conduit Elbow, 1 in Trade, 90 deg, Steel, Galvanized
Topaz's Rigid 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 18 Threaded Conduit Elbow, 3 in Trade, 45 deg, Steel, Galvanized
Topaz's Rigid 45° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are defect free to ensure a secure connection to Rigid conduit and to preserve longevity. Available in sizes from 1/2” to 6”; UL listed, HDG, meets Federal specification WW-C-563.
Southwire - Topaz 1058 Compression Plain End Elbow, 3 in Trade, 45 deg, PVC
Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 45° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”
Southwire - Topaz 1048 Compression Plain End Elbow, 3 in Trade, 90 deg, PVC
Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 90° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”
Kraloy® 078561 Spigot Standard Radius 99 Conduit Elbow, 4 in Trade, 45 deg, PVC
Kraloy® elbows and sweeps are lightweight and offer excellent chemical resistance with high tensile and impact strength. Suitable for exposed, concrete encased and direct burial applications, Kraloy® elbows and sweeps are manufactured from high impact, non-conducting and non-corroding PVC. PVC reduces labor on typical installations by as much as two-thirds because it is easy to work with. PVC does not require the labor intensive tools usually associated with steel products, such as vises, threading equipment and reamers.
Kraloy® 078560 Spigot Standard Radius 99 Conduit Elbow, 3-1/2 in Trade, 45 deg, PVC
Kraloy® elbows and sweeps are lightweight and offer excellent chemical resistance with high tensile and impact strength. Suitable for exposed, concrete encased and direct burial applications, Kraloy® elbows and sweeps are manufactured from high impact, non-conducting and non-corroding PVC. PVC reduces labor on typical installations by as much as two-thirds because it is easy to work with. PVC does not require the labor intensive tools usually associated with steel products, such as vises, threading equipment and reamers.
Electroline Standard Radius Threaded Conduit Elbow, 2-1/2 in Trade, 45 deg, Steel, Hot Dipped Galvanized
2-1/2" 45-DEG RIGID CONDUIT ELBOWS
Electroline Plus 8348 Standard Radius Conduit Elbow, 3 in Trade, 90 deg, Steel, Epoxy Modified Acrylic/Galvanized
Wheatland controls the manufacture of its hot dip galvanized steel rigid metal conduit (RMC), electrical Metallic tubing (EMT) and Intermediate metal conduit (IMC) every step of the way. we fabricate our own tubing from flat steel coils, weld it and do our own galvanizing. Then to be sure you get the same quality throughout the raceway system, we make our own nipples, elbows and couplings to match. in fact, we're the only conduit manufacturer who does.
Electroline 6497 Standard Radius Threaded Conduit Elbow, 1/2 in Trade, 90 deg, Aluminum
Picoma® 6497 Standard Radius Threaded Conduit Elbow, 1/2 in Trade, 90 deg, Aluminum
ELECTROLINE 1/2" 90-DEG EMT CONDUIT GALV/ELBOW ELE TTE-1/2
EMT 90 deg elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity.
Carlon® UB9AJ SCH 80 Plain End Standard Radius Conduit Elbow, 2 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. these premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Carlon® UA9FNB SCH 40 Bell End Special Radius Conduit Elbow, 4 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Carlon® UA9FN SCH 40 Plain End Special Radius Conduit Elbow, 4 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Carlon® UA9FL SCH 40 Plain End Special Radius Conduit Elbow, 3 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. these premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service free product life.
Carlon® UA9AN SCH 40 Plain End Standard Radius Conduit Elbow, 4 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Carlon® UA9AM SCH 40 Plain End Standard Radius Conduit Elbow, 3-1/2 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. these premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service free product life.
Carlon® UA9ALB SCH 40 Bell End Standard Radius Conduit Elbow, 3 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. these premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service free product life.
Recently Viewed
1-7/16"-ID FL/OD INSERT BEARINGS-FAFG1107KRR>
Steel Rule Depth Gage is very handy and can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. Graduations at 32nds, and 64ths. Head Length is 2-5/8" x 1/8".
Klein® 5144H Replacement Hook, For Use With 5144 and 5169 Aerial Basket, Bucket Hooks Mounting, Nylon/Polyamide 6.6, White
Mount your aerial buckets with these durable, all-weather hooks. Allow easy access to your tools and parts. Fits the Klein Tools Aerial-Basket Tool Carrier and Oval Bucket.
GEARWRENCH® 85698 XL Series Extra Long Length Locking Combination Ratcheting Wrench Set, 12 Pieces, 8 to 19 mm, Polished Chrome
The GEARWRENCH ratcheting combination wrenches are the original patented ratcheting wrench! The ratcheting box end is designed to need as little as 5° to move fasteners versus 30° for standard wrenches. The wrenches are made from strong alloy steel with a bright, full polish chrome finish. The ratcheting box end features off-corner loading for a better grip on the fastener and reduces fastener rounding. They’re available in various lengths and styles, including: XL length, stubby, flex, stubby flex, and locking flex.
Browning® 1304781 Replacement Disc, 2-1/4 in ID x 4-1/2 in OD, For Use With T45L Torque Limiter
Calterm 50145 Wire, Copper Conductor, 14 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
Calterm 50145 Wire, Copper Conductor, 14 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
