Kraloy® 078560 Spigot Standard Radius 99 Conduit Elbow, 3-1/2 in Trade, 45 deg, PVC
Kraloy 45° Standard Radius Elbows are manufactured from high impact, nonconducting and noncorroding rigid PVC. Elbows are suitable for exposed, concrete encased and direct burial applications, are lightweight and offer excellent chemical resistance with high tensile and impact strength.
-
BrandKraloy®
-
UPC622454785601
-
Manufacturer Part Number078560
-
CountryUSA
-
MaterialPVC
-
Radius15 in
-
Trade Size3-1/2 in
-
TypeSpigot Standard Radius
-
Angle45 deg
-
Dimensions4 in Dia
-
Suitable For Use WithRigid PVC Conduit
- Made from impact resistant Schedule 40 rigid nonmetallic PVC
- Approved for use in exposed, concrete encased and direct burial applications Available in plain and integral belled end for use with nonmetallic solvent weld fittings
- Lightweight yet offers high impact and tensile strength
- Chemical resistant to a wide range of acids, alkalis or salt solutions
- Corrosion resistant for lower maintenance cost and longer life
- PVC is nonconductive eliminating dangerous second point of contact
-
Alternative Part Number40STD3545|13139060
-
UNSPSC39131717
-
IDEA Index ID13139060
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|UL 514B|UL 651
-
WarrantyLimited
-
Warranty Information
-
Catalog
-
Specification Sheet
Recently Viewed
Kraloy® 078560 Spigot Standard Radius 99 Conduit Elbow, 3-1/2 in Trade, 45 deg, PVC
Kraloy 45° Standard Radius Elbows are manufactured from high impact, nonconducting and noncorroding rigid PVC. Elbows are suitable for exposed, concrete encased and direct burial applications, are lightweight and offer excellent chemical resistance with high tensile and impact strength.
2"-NPT KUNKLE STEAM VALVE - KUN0930H01GC0015 >
LIFT-ROD GUIDE HOLDER-JWH412949>
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
GEARWRENCH® 86992 Adjustable Height Swivel Shop Stool, 225 lb Capacity, 19 in L x 26 to 31 in H
GEARWRENCH work seats and stools let you work comfortably at a level that gives you maximum access and leverage, whether working at low heights or doing bench work. A rolling work seat and a high stool are both available to suit your shop environment needs and personal working style. Both are air shock height adjustable and made to stand up to the hard demands of auto shop or industrial plant environments.
MasterDrive H5/8 H Series Double Split Tapered Bushing, 5/8 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-11/32 in OAL, Powdered Metal
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
