Single Groove Sheaves
MasterDrive BK32-7/8 BK Series Type-2 Groove Sheave, Finished Bore, 0.875 in Dia Bore, 3.35 in Dia Outside, 2.6 in (A/4L)/3 in (B/5L) Dia Pitch, 0.812 in W Face
Light Duty Fractional Horsepower (FHP) Sheaves are accurately machined from cast gray iron for strength and durability. They are statically balanced, and powder coated (painted) with a smooth attractive finish. BK sheaves are designed for use "B" belts, "4L" belts, as well as "A" belts & "5L" belts. They are common in many belt driven industrial power transmission applications, and most often utilized in HVAC equipment.
MasterDrive BK32-3/4 BK Series Type-2 Groove Sheave, Finished Bore, 0.75 in Dia Bore, 3.35 in Dia Outside, 2.6 in (A/4L)/3 in (B/5L) Dia Pitch, 0.812 in W Face
Light Duty Fractional Horsepower (FHP) Sheaves are accurately machined from cast gray iron for strength and durability. They are statically balanced, and powder coated (painted) with a smooth attractive finish. BK sheaves are designed for use "B" belts, "4L" belts, as well as "A" belts & "5L" belts. They are common in many belt driven industrial power transmission applications, and most often utilized in HVAC equipment.
IDC Select 1-GRV 3/4"-ID A-BELT SHEAVES IDC IDC AK-034-3/4
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select 1-GRV 3/4"-ID A-BELT SHEAVES IDC AK-044-3/4
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select 1-GRV 3/4"-ID A OR B-BELT SHEAVES IDC BK-024-3/4
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select 1-GRV 1/2"-ID A-BELT SHEAVES IDC AK-023-1/2
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select 1-GRV 1/2"-ID A OR B-BELT SHEAVES IDC BK-034-1/2
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select 1-GROOVE 5/8"-ID "A"-BELT SHEAVES IDC AK-084-5/8
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select 1-GROOVE 15/16"-ID "A"-BELT SHEAVE IDC AK-054-15/16
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Browning® Gripbelt® 1060888 Arm Type 16 Single Groove Sheave, Split Taper Bore, 3/4 to 2-11/16 in Dia Bore, 14 in OD, 13.95 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060888 Arm Type 16 Single Groove Sheave, Split Taper Bore, 3/4 to 2-11/16 in Dia Bore, 14 in OD, 13.95 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060805 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 10.6 in OD, 10.55 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060805 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 10.6 in OD, 10.55 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060565 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 6-1/2 in OD, 6.45 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060565 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 6-1/2 in OD, 6.45 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060482 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 6 in OD, 5.95 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060482 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 6 in OD, 5.95 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059948 Type H3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 4.12 in OD, 4.07 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059948 Type H3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 4.12 in OD, 4.07 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059880 Type H3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.65 in OD, 3.6 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059880 Type H3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.65 in OD, 3.6 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059310 Type H1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059310 Type H1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
Browning® Classical Gripbelt® 3695210 B5V® Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.68 in OD, 4.2 in (A)/4.7 in (B)/4-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3695210 B5V® Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.68 in OD, 4.2 in (A)/4.7 in (B)/4-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3695178 B5V® Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.48 in OD, 4 in (A)/4-1/2 in (B)/4.3 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3695178 B5V® Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.48 in OD, 4 in (A)/4-1/2 in (B)/4.3 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693793 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 12.68 in OD, 12.2 in (A)/12.7 in (B)/12-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693793 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 12.68 in OD, 12.2 in (A)/12.7 in (B)/12-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693769 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.28 in OD, 8.8 in (A)/9.3 in (B)/9.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693769 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.28 in OD, 8.8 in (A)/9.3 in (B)/9.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693751 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 8.88 in OD, 8.4 in (A)/8.9 in (B)/8.7 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693751 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 8.88 in OD, 8.4 in (A)/8.9 in (B)/8.7 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693744 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 8.28 in OD, 7.8 in (A)/8.3 in (B)/8.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693744 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 8.28 in OD, 7.8 in (A)/8.3 in (B)/8.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693728 B5V® Type 1 Web Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 7.28 in OD, 6.8 in (A)/7.3 in (B)/7.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693728 B5V® Type 1 Web Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 7.28 in OD, 6.8 in (A)/7.3 in (B)/7.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693710 B5V® Type 1 Web Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 7.08 in OD, 6.6 in (A)/7.1 in (B)/6.9 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693710 B5V® Type 1 Web Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 7.08 in OD, 6.6 in (A)/7.1 in (B)/6.9 in (BV) Dia Pitch, 1 in W Face
Recently Viewed
PIX 550-J-6 POLY RIB J V-BELT, 55" OC, 6 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J6 >
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX630J10>
Dichtomatik S70113 O-Ring, 113 Dash Number, 0.549 in ID x 0.755 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
HCI Preferred Supplier GE214NPT 2-Way High Pressure Ball Valve, 1/4 in Nominal, NPTF End Style, Steel Body, Full Port, Buna-N® O-Ring Softgoods
HCI Preferred Supplier GE214NPT 2-Way High Pressure Ball Valve, 1/4 in Nominal, NPTF End Style, Steel Body, Full Port, Buna-N® O-Ring Softgoods
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
Protect your workpieces from damage with a fresh set of Wilton R-6 Rubber Face 6" Jaw Caps in your Wilton 11106 Bench Vise. These authentic replacement caps are made of aluminum and synthetic rubber. Rubber faces conform to the workpiece and grip firmly without slipping.
