IDC Select® IDC AK084-5/8 Light Duty Type 3 Single Groove Sheave With 3/16 x 3/32 in Keyway and Setscrew, Bored to Size Bore, 5/8 in Dia Bore, 8-1/4 in OD, 8 in Dia Pitch, 3/4 in W Face
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
-
BrandIDC Select®
-
UPC887412011004
-
Manufacturer Part NumberIDC AK084-5/8
-
CountryUSA
-
Face Width3/4 in
-
Pitch Diameter8 in
-
FinishBaked Enamel
-
MaterialClass 25 Cast Iron
-
TypeLight Duty Type 3
-
Hub Projection25/32 in
-
Outside Diameter8-1/4 in
-
Bore Diameter5/8 in
-
Bore TypeBored to Size
-
Suitable For Use With3L and 4L/A Cross Section V-Belts
- Precision machined from gray cast iron
- Statically balanced
- Cast iron sheaves should not exceed 6500 fpm rim speed
- Special or dynamic balancing should be considered when speeds exceed 5000 fpm
- 7.66 in Dia pitch 3L/8 in Dia pitch 4L(A)
-
UNSPSC31171804
-
Package Description1/PK
-
Standards/ApprovalsASTM Specified|SAE Standard
-
Catalog
-
Technical Bulletin
Recently Viewed
IDC Select® IDC AK084-5/8 Light Duty Type 3 Single Groove Sheave With 3/16 x 3/32 in Keyway and Setscrew, Bored to Size Bore, 5/8 in Dia Bore, 8-1/4 in OD, 8 in Dia Pitch, 3/4 in W Face
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Browning® Classical Gripbelt® 1028497 BK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028497 BK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028786 BK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028786 BK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028125 BK Series Type 2 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028125 BK Series Type 2 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
Dodge® 112175 Single Groove Sheave, Taper-Lock® Bore, 1/2 to 1-11/16 in Dia Bore, 3.35 in OD, 3.3 in Dia Pitch, 1.06 in W Face
All Dodge® V-drive sheaves are manufactured to ISO 9002 quality standards with precision machining that meets or exceeds joint RMA/MPTA industry standards for smooth operation and extended belt life. This provides low economical costs per hp transmitted due to shock load and vibration isolation creating clean, quiet operation.
Browning® Classical Gripbelt® 3195161 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 5.95 in OD, 5.9 in (A)/5.36 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 3195161 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-1/8 in Dia Bore, 5.95 in OD, 5.9 in (A)/5.36 in (3L) Dia Pitch, 3/4 in W Face
