Poly-V Belts
Gates® Power Transmission Polyflex® JB® 3/7M1360JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 53.3 in L Outside, 7/32 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
Gates® Power Transmission Polyflex® JB® 3/7M710JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 27.7 in L Outside, 7/32 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
Gates® Power Transmission Polyflex® JB® 3/7M750JB Joined Band Light Duty V-Belt, 7M Section, 9/32 in W Top, 29.3 in L Outside, 7/32 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
Gates® Power Transmission Polyflex® JB® 4/5M925JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 36.42 in L Outside, 1/8 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
Gates® Power Transmission Polyflex® JB® 5/5M1090JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 42.91 in L Outside, 1/8 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
Gates® Power Transmission Polyflex® JB® 5/5M650JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 25.59 in L Outside, 1/8 in THK, High Modulus Polyurethane
Joined band belt construction provides increased belt stability, preventing belts from turning over or from coming off of the drive. Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts.
Recently Viewed
12/16 GAL 24 X 32 CAN LINERS--CS/1000
Milwaukee® M18™ 2636-20 Double Cut Bare Tool Cordless Shear, 14 ga Steel, 16 ga Stainless Steel Cutting, 2300 spm, 15.2 in OAL, Li-Ion Battery
With the introduction of the new M18™ cordless shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an in-lbs wrist design that maximizes control during use. Also adding the industry’s only tool-free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® cordless shears are changing the way tradesmen work on the jobsite today.
Sealmaster® 700004 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 1/2 in Dia Bore, 1.8504 in OD, 1-7/32 in W, 2611 lb Dynamic/1444 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
#9 X 7/8" Flat Head Slotted Wood Screw
ISOSTATIC™ Oilube® 401401 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401401 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401127 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W
ISOSTATIC™ Oilube® 401127 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W
