Gates® Power Transmission Micro-V® 300J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
-
BrandGates® Power Transmission
-
UPC072053268256
-
Manufacturer Part Number300J6
-
CountryUSA
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs6
-
Outside Length30 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917103006
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Micro-V® 300J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
FYH® NAPK209 27 NAPK Normal Duty Pillow Block Unit, 1-11/16 in Dia Bore, 5-7/8 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-15/32 in OAL 4-3/16 in OAH
FYH® NAPK209 27 NAPK Normal Duty Pillow Block Unit, 1-11/16 in Dia Bore, 5-7/8 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-15/32 in OAL 4-3/16 in OAH
CPVC TO NATIONAL PIPE THREAD ADAPTER-NIB473341/2 >
Gates® Power Transmission Micro-V® 500J8 Heavy Duty V-Belt, J Section, 3/32 in W Top, 50 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
DeWALT® 01201-PWR Short Shell Expansion Anchor, 1/2 in Dia, 2 in OAL, 3/4 in Drill, Zamac Alloy
The Lag Shield™ is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. In harder masonry materials, short style Lag Shield™ are used to reduce drilling time. The long style version is used in soft or weak masonry to better develop strength. The Lag Shield™ is not recommended for overhead or life safety applications.
Gates® Power Transmission Polyflex® 11M1360 Light Duty V-Belt, 11M Section, 7/16 in W Top, 53.54 in L Outside, 9/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
