Gates® Power Transmission Micro-V® 430J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 43 in L Outside, 5/32 in THK, Chloroprene
Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. Exclusive truncated (shortened) profile gives Gates Micro-V belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V belt products includes slabs in several widths as well as single belts in J, K, L and M sections in order to perfectly match customer requirements.
-
BrandGates® Power Transmission
-
UPC72053281279
-
Manufacturer Part Number430J6
-
CountryUSA|Canada
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs6
-
Outside Length43 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917104306
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Micro-V® 430J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 43 in L Outside, 5/32 in THK, Chloroprene
Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. Exclusive truncated (shortened) profile gives Gates Micro-V belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V belt products includes slabs in several widths as well as single belts in J, K, L and M sections in order to perfectly match customer requirements.
Dodge® 083316 First Stage Pinion Gear, 9 Diametral Pitch, 9 Teeth, 0.9 in Dia Pitch
Dodge® 083316 First Stage Pinion Gear, 9 Diametral Pitch, 9 Teeth, 0.9 in Dia Pitch
INSSXR-100 Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
2" X 1 1/4" BLACK TEE-JPW2X2X11/4BT >
Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite large-diameter Push-to-Connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT, or HDPE pipe in any combination. They are available in 1-1/4-IN, 1-1/2-IN and 2-IN CTS sizes. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
5/16" X 1-3/4" USS SHOULDER BOLTS -HOL08030 >
