Gates® Power Transmission Micro-V® 200J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 20 in L Outside, 5/32 in THK, Chloroprene
Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. Exclusive truncated (shortened) profile gives Gates Micro-V belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V belt products includes slabs in several widths as well as single belts in J, K, L and M sections in order to perfectly match customer requirements.
-
BrandGates® Power Transmission
-
UPC72053248111
-
Manufacturer Part Number200J6
-
CountryUSA|Canada
-
Thickness5/32 in
-
MaterialChloroprene
-
Top Width3/32 in
-
Reinforced MaterialPolyester
-
TypeHeavy Duty
-
Minimum Pulley Diameter3.183 in
-
Section SizeJ
-
Series9171
-
Number of Ribs6
-
Outside Length20 in
- Fiber reinforced ribs for excellent wear resistance
- High modulus, low stretch tensile member for added strength and dependability
- Smooth running for minimal vibration at high speeds
- Oil and heat-resistant, static conductivity
-
Alternative Part Number917102006
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Micro-V® 200J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 20 in L Outside, 5/32 in THK, Chloroprene
Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. Exclusive truncated (shortened) profile gives Gates Micro-V belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V belt products includes slabs in several widths as well as single belts in J, K, L and M sections in order to perfectly match customer requirements.
1-QT LATEX EXTERIOR GLOSS CLEAR BASE-BLP141640QT >
16 TOOTH L-PITCH TIMING BELT SHEAVES-BRW16LF075X3/4 >
LARGE COWHIDE LEATHER PALM DRIVERS GLOVES - GLV993KL >
Connection Type: Male Threaded x Male Threaded (TBE - Threaded Both Ends).Material Class: Schedule 80 PVC, built for higher-pressure commercial and irrigation systems. Dimensions: 1-inch nominal diameter by 2 inches in length.
Smith Bearing® CR-1-5/8-X Cylindrical Stud Type Needle Bearing Cam Follower, 1-5/8 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
