Gates® Power Transmission PowerGrip® GT®3 1064-8MGT-50 Synchronous Belt, 50 mm W, 1064 mm OAL, 8 mm Pitch, 133 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
-
BrandGates® Power Transmission
-
UPC770075789680
-
Manufacturer Part Number1064-8MGT-50
-
CountryUSA
-
Pitch8 mm
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
Width50 mm
-
Series9356
-
Number of Teeth133
-
Overall Length1064 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Gates® patented tooth profile is designed for use with a specific sprocket groove profile
- The sprocket groove-belt tooth combinations increases capacity, while improving registration
- Eliminates lubrication and re-tensioning to reduce maintenance and labor as compared to roller chain drives
- A single twist cord helps prevent the belt from moving downward on vertical shaft ACHE applications
- Neoprene body provides protection against grime, grease, oil and moisture
- PowerGrip® GT®3 has more tooth ratchet resistance than HTD®
-
Alternative Part Number95791007
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsISO 9563
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®3 1064-8MGT-50 Synchronous Belt, 50 mm W, 1064 mm OAL, 8 mm Pitch, 133 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2310-14MGT-40 9232 Synchronous Belt, 165 Teeth, 14 mm Pitch, 2310 mm OAL, 40 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP800-8MGT-20 9232 Synchronous Belt, 100 Teeth, 8 mm Pitch, 800 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
MasterDrive 6B70SF Type A-1 Groove Sheave, 1/2 to 2-15/16 in Dia Bore, 7.35 in Dia Outside, 6 Grooves, 6.6 in (A)/7 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
Browning® 1004282 Type D2 Multiple Sheave, 1/2 to 2 in QD® Bore, 6-3/4 in OD, 2 Grooves, 6.2 in (A)/6.7 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® 1004241 Type D1 Multiple Sheave, 1/2 to 2 in QD® Bore, 5.95 in OD, 2 Grooves, 5.4 in (A)/5.9 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
