Non-Metallic Sheathed Cables
Southwire® Romex® SIMpull® NM-12/2-CU Non-Metallic Sheathed Cable, 600 V AC, (2) 12 AWG Solid Conductor, 250 ft L, Yellow
Southwire® Romex® Brand SIMpull® Type NM-B cable is manufactured as 2, 3, or 4 conductor cable, with a bare ground wire. Copper conductors are annealed (soft) copper. Stranded conductors are compressed stranded. Conductor insulation is 90 degC-rated polyvinyl chloride (PVC), nylon jacketed. Southwire® Romex® Brand SIMpull® Type NM-B is designed for Easier Pulling, Resulting in Easier installation. The cable jacket is color-coded for quick size identification; White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG,and Black - 8 AWG and 6 AWG.
Southwire® Romex® SIMpull® 63950021 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 6 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63950002 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 6 AWG Copper Conductor, 125 ft L, Black
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63949221 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 8 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63949202 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 8 AWG Copper Conductor, 125 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63948455 Type NM-B Sheathed Cable, 600 V AC, 10 AWG Solid Copper Conductor, 250 ft L, Orange
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63947655 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 12 AWG Solid Copper Conductor, 250 ft L, Yellow
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63946855 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 14 AWG Solid Copper Conductor, 250 ft L, White
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® 28829055 Type NM-B Sheathed Cable With Grounding Wire, 600 V AC, (2) 10 AWG Solid Copper Conductor, 250 ft L, Orange
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® 28827455 Type NM-B Non-Metallic Sheathed Cable, Coil Packaging, 600 V AC, (2) 14 AWG Solid Copper Conductor, 250 ft L, White
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® 13055955 Type UF-B Underground Feeder and Branch Circuit Cable, Coil Packaging, 600 V AC, (2) 12 AWG Solid Copper Conductor, 250 ft L, Gray
Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.
Romex® SIMpull® 28828272 Type NMB Cable, Spool Packaging, 600 V, (2) 12 AWG Copper Conductor, 400 ft L, Yellow
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Recently Viewed
The Grey Pneumatic 5033MD is a #5 spline drive x 33mm deep-length 6-point metric impact socket designed for high-torque professional applications like automotive, fleet maintenance, and industrial tire service. Key Technical Specifications Drive End Shape & Size: #5 Spline Drive Socket End Size: 33mm (6-Point Hex configuration to prevent fastener rounding) Length Profile: Deep length (108mm / ~4.25 inches overall length) for recessed bolts Material: High-grade Chrome-Molybdenum (Chro-Moly) alloy
The Grey Pneumatic 1/2" Drive x 11/16" Standard Universal Socket (2022U) is a versatile and durable tool designed to handle a variety of fastening tasks. Featuring a universal joint for flexibility and high-quality chrome-molybdenum steel construction, this socket is built to withstand the demands of impact tools and provides precision and reliability for both professional and DIY use.
KEY FEATURES AND BENEFITS:
Universal Joint: Provides flexibility for working in tight spaces and at various angles.
Impact-Resistant: Designed for use with impact tools, ensuring durability under heavy loads.
High-Quality Material: Made from chrome-molybdenum steel for strength and longevity.
Precise Fit: 1/2" drive and 11/16" socket size for compatibility with standard tools and fasteners.
Easy to Use: Simple design for quick and efficient use.
SPECIFICATIONS:
Drive: 1/2"
Size: 11/16"
Type: Standard Universal Impact Socket
Material: Chrome-molybdenum steel
Design: 6-point
Length: Short (exact length may vary)
Brand: Grey Pneumatic
/4" Drive 10 mm Hex Impact Bit Socket (9910M) by Grey Pneumatic®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
4"-SQUARE 1/2"-RAISED SURFACE COMBINATION EXPOSED WORK COVER - APL8375 >
The Grey Pneumatic 1/2" Drive x 1-1/16" Standard - 12 Point Socket (2134R) is a premium-quality impact socket designed for demanding professional and DIY use. Crafted from high-grade chrome-molybdenum steel, this socket offers exceptional strength, durability, and resistance to wear and tear. Its impact-resistant design is ideal for use with impact wrenches, providing reliable performance in even the toughest conditions.
KEY FEATURES AND BENEFITS:
Superior Durability: Constructed from high-quality chrome-molybdenum steel for long-lasting performance.
Impact-Resistant Design: Ideal for use with impact wrenches, ensuring reliable performance in demanding applications.
12-Point Socket: Provides greater flexibility and access in tight spaces.
High Torque Drive: Reduces wear on fasteners and sockets, while delivering increased torque.
Reinforced Socket Walls: Enhance strength and durability by transferring pressure from thinner to thicker sections.
SPECIFICATIONS:
Drive Size: 1/2"
Socket Size: 1-1/16"
Points: 12
Material: Chrome-molybdenum steel
Impact-Resistant: Yes
Warranty: Lifetime
The Grey Pneumatic 1/4" Surface Drive x 13mm Deep Socket (913MDS) is a precision-engineered tool designed to deliver exceptional performance and durability in demanding applications. Crafted from high-quality chrome-molybdenum steel and undergoing rigorous heat treatment, this socket offers an optimal balance of strength and toughness.
KEY FEATURES AND BENEFITS:
Superior Durability: Constructed from premium chrome-molybdenum steel for exceptional strength and longevity.
Precise Heat Treatment: Undergoes a meticulous heat treatment process to ensure optimal balance of strength and toughness.
Impact Tool Compatibility: Specifically designed for use with impact wrenches, meeting industry standards for performance.
Enhanced Torque Transfer: Engineered to efficiently transfer torque from the thinner socket wall to the thicker section, maximizing strength and power.
Increased Torque Capacity: Allows up to 20% more torque to be applied compared to standard hex impact sockets.
High Torque Drive: Features a high torque drive that reduces wear on fastener corners and sockets, improves strength, increases torque transfer, and facilitates access to tight spaces.
SPECIFICATIONS:
Drive: 1/4"
Socket Size: 13mm
Socket Type: Deep
Drive Type: Surface Drive
Material: Chrome Vanadium Steel
Finish: Chrome Plated
