Non-Metallic Sheathed Cables
Romex® SIMpull® 28828272 Type NMB Cable, Spool Packaging, 600 V, (2) 12 AWG Copper Conductor, 400 ft L, Yellow
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® 13055955 Type UF-B Underground Feeder and Branch Circuit Cable, Coil Packaging, 600 V AC, (2) 12 AWG Solid Copper Conductor, 250 ft L, Gray
Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.
Southwire® 28827455 Type NM-B Non-Metallic Sheathed Cable, Coil Packaging, 600 V AC, (2) 14 AWG Solid Copper Conductor, 250 ft L, White
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® 28829055 Type NM-B Sheathed Cable With Grounding Wire, 600 V AC, (2) 10 AWG Solid Copper Conductor, 250 ft L, Orange
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63946855 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 14 AWG Solid Copper Conductor, 250 ft L, White
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63947655 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 12 AWG Solid Copper Conductor, 250 ft L, Yellow
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63948455 Type NM-B Sheathed Cable, 600 V AC, 10 AWG Solid Copper Conductor, 250 ft L, Orange
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63949202 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 8 AWG Copper Conductor, 125 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63949221 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 8 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63950002 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 6 AWG Copper Conductor, 125 ft L, Black
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® 63950021 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 6 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Southwire® Romex® SIMpull® NM-12/2-CU Non-Metallic Sheathed Cable, 600 V AC, (2) 12 AWG Solid Conductor, 250 ft L, Yellow
Southwire® Romex® Brand SIMpull® Type NM-B cable is manufactured as 2, 3, or 4 conductor cable, with a bare ground wire. Copper conductors are annealed (soft) copper. Stranded conductors are compressed stranded. Conductor insulation is 90 degC-rated polyvinyl chloride (PVC), nylon jacketed. Southwire® Romex® Brand SIMpull® Type NM-B is designed for Easier Pulling, Resulting in Easier installation. The cable jacket is color-coded for quick size identification; White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG,and Black - 8 AWG and 6 AWG.
Recently Viewed
3/4"-HUB 2-GANG ALUMINUM DEVICE BOX - APLFD275A>
2" #5 SPLINE DRIVE I/SOCKETS
The Grey Pneumatic 3/4" Drive x 1-1/8" Standard - 12 Point Socket (3136R) is a high-quality, heavy-duty impact socket designed for demanding applications. With its 3/4" drive and 1-1/8" short length, this socket is perfect for accessing tight spaces and handling tough jobs. Crafted from chrome-molybdenum steel and coated with black oxide, it offers exceptional strength, durability, and resistance to rust and corrosion. The precise fit ensures reliable performance and professional results in a variety of settings.
KEY FEATURES AND BENEFITS:
Impact-resistant: Built to withstand the force of impact wrenches for long-lasting durability.
Short length: Ideal for working in confined spaces, providing better access to hard-to-reach bolts.
High-quality steel: Constructed from chrome-molybdenum steel, ensuring exceptional strength and durability.
Precise fit: Designed to provide a secure and accurate fit for a wide range of 1-1/8" hex bolts.
Easy identification: Hard-stamped size markings for quick and easy identification.
Rust and corrosion resistant: Black oxide coating protects against the elements for long-lasting performance.
SPECIFICATIONS:
Drive size: 3/4"
Socket size: 1-1/8"
Length: Short
Point count: 12
Material: Chrome-molybdenum steel
Finish: Black oxide coated
3/4"-HUB 2-GANG MALLEABLE DEVICE BOX - APLFSC275>
Grey Pneumatic 1/2" Drive x 30mm Deep - 12 Point Socket (2130MD) is a high-quality, professional-grade impact socket designed for demanding applications. Its 12-point design, metric sizing, and impact-resistant construction make it suitable for a wide range of tasks, from automotive repair to industrial maintenance.
KEY FEATURES AND BENEFITS:
12-Point Design: Offers flexibility and ease of use in various applications.
Metric Sizing: Designed for use with metric fasteners.
Impact Socket: Engineered for use with impact tools, providing increased durability and power.
30 MM Deep Length: Can reach deep into nuts and bolts.
SPECIFICATIONS:
Size: 1/2" Drive x 30mm Deep
Point: 12 Point
Material: High-Quality Alloy Steel
Heat Treatment: Yes
Impact Resistant: Yes
Metric: Yes
The Grey Pneumatic 1/2" Drive x 20mm Standard - 12 Point Socket (2120M) is a premium-quality tool designed for durability and performance in both professional and DIY applications.
KEY FEATURES AND BENEFITS:
Premium Material: Crafted from chrome-molybdenum steel for exceptional strength and durability.
Impact Tool Optimized: Designed to work seamlessly with impact tools for optimal performance.
Enhanced Strength: Unique design redirects pressure for increased strength and durability.
High Torque Drive: Minimizes wear and delivers increased torque for efficient fastening.
Precision Manufacturing: Rigorously tested and quality-controlled for exceptional performance and reliability.
Cost-Effective: Offers competitive pricing without compromising quality.
SPECIFICATIONS:
Drive: 1/2"
Size: 20mm
Points: 12
Material: Chrome-molybdenum steel
Weight: 4.5 ounces
Dimensions: 1.5 x 1.25 x 1.25 inches
