Clamp Meters
FLUKE-323 Clamp Meter, Auto, True Rms, 400A Ac; |Fluke Electronics
AI Mode Conversation: FLUKE FLUKE 323You said: FLUKE FLUKE 323The Fluke 323 True-RMS Clamp Meter is a rugged, entry-level diagnostic tool designed for general electrical troubleshooting. It provides precise True-RMS measurements for accurate readings even on non-linear or electrically noisy circuits. Engineered with a slim, compact form factor, it is highly optimized for checking tight, cramped wire compartments.
Fluke® FLUKE-323 Clamp Meter, 400 A, 600 VAC/VDC, 4000 Ohm, 30 mm Jaw, Backlit Display
True-RMS measurements and optimized ergonomics make the 320 series clamp meters the best general troubleshooting tools for commercial and residential electricians. The Fluke® 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Fluke® FLUKE-324 True-RMS Clamp Meter, 600 VAC/VDC, 400 to 4000 Ohm, 45 to 400 Hz, Backlit Display
True-RMS measurements and optimized ergonomics make the 320 series clamp meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke® 324 model also includes temperature and capacitance measurement capabilities.
Fluke® FLUKE-373 Clamp Meter, 600 A, 600 VAC/VDC, 6000 Ohm, Dual Backlit Display
The new Fluke® 373 clamp meter offers improved performance perfect for any AC only current measurement situations. Featuring True-RMS AC voltage and current measurements and resistance measurement up to 6000 Ohm with continuity detection, the Fluke® 373 is everything you need, plus a little more.
Fluke® FLUKE-374/FC Wireless Clamp Meter, 600 A, 6000 Ohm, 10 to 100/100 to 500 Hz, 34 mm Jaw
The Fluke® 374 FC offers advanced troubleshooting performance and is now part of the Fluke® Connect® family of wireless test tools.
Fluke® FLUKE-375/FC Wireless Clamp Meter, 600 A, 60 kOhm, 10 to 100/100 to 500 Hz, 34 mm Jaw
The Fluke® 375 FC is a high performance clamp meter with wireless communication, measures very low voltage and very high resistance, plus a VFD low pass filter for accurate motor drive measurements.
Fluke® FLUKE-376/FC Wireless Clamp Meter, 999.9 A, 60 kOhm, 10 to 100/100 to 500 Hz, 34 mm Jaw
The Fluke® 376 FC wireless True-RMS™ AC/DC clamp meter offers measurements up to 1000 VAC and 1000 A, AC or DC, plus an included iFlex" flexible current clamp.
Fluke® I1010 AC/DC Current Clamp, 600/1000 A/600 VAC, 10 kHz
Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC current clamp is highly reliable, measures 1A to 1000A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.
Fluke® T5-600-USA Electrical Tester Clamp Meter With Open Jaw, 100 A, 600 VAC, 50/60 Hz
Electrical tester with OpenJaw™ current, 600 VAC and 4 mm detachable probes. The Fluke® T5 electrical testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, Ohms or current and the tester does the rest. OpenJaw and trade, current lets you check current up to 100 A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making It easy to tote the T5 in your tool pouch. Detachable SlimReach and trade, test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
Gardner Bender GCM-221 6-Function Compact Manual Ranging Digital Clamp Meter, 600 A, 600 V AC/DC, 200 Ohm, 1 in Jaw, 3-1/2 Digits LCD Display
The Gardner Bender digital clamp meter measures current up to 600A AC, voltage to 600V AC/DC and resistance to 1M ohms. This versatile tool features an easy to read LCD display and data hold functionality for easy retrieval. CETLus listed with Cat III 300V and Cat II 600V ratings. It is durably designed with a 6 ft. Drop and 150 lb. Crush rating.
Klein Tools 400-AMP AC/DC DIGITAL CLAMP METER KLE CL-390
Klein Tools CL390 is an automatically ranging true root mean squared (TRMS) digital clamp meter. It measures AC/DC current and NCVT via the clamp, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, and diodes via test leads, and temperature via a thermocouple probe. It features a high visibility, reverse contrast LCD display that optimizes view ability both in dark or bright ambient lighting.
Milwaukee® 2205-20 Heavy Duty Digital Fork Meter, 200 A, 1000 V AC/DC, 40 mOhm, 50/60 Hz, 5/8 in Jaw, High Contrast White on Black LCD Display
The Milwaukee fork meter is a heavy duty True-RMS electrical tester for professional residential, commercial and industrial applications. The 2205-20 is four tools in one providing current measurement, voltage measurement, voltage detection and task lighting. Additionally, the new tool provides a wide 0.63 in. fork opening, high 200 amp current range and a high contrast white-on-black display.
Recently Viewed
Morse® 2360998 Replacement Pressure Tip, For Use With Morse® #120 to 160 Chain Tool
Morse® 2360998 Replacement Pressure Tip, For Use With Morse® #120 to 160 Chain Tool
DIAL CALIPERS-MIT505665>
150/200 MH/PS CAPACITORS
Imperial ONE FITâ„¢ IBOATV-3 Oscillating Saw Metal/Wood Blade Set, For Use With Milwaukee, Ridgid, Ryobi, Bosch, DeWalt, Dremel, Fein, Makita, Rockwell Imperial ONE FITâ„¢ Anchor Fits Majority of Non-Imperial STARLOCKâ„¢ Multi-Tool, 1 in Arbor, Bi-Metal
Imperial Blades One Fitâ„¢ Storm Titanium Metal/Wood Variety Pack includes 3 Storm Titanium bi-metal (BiM) blades: One Fitâ„¢ 1-1/8" and 1-3/4" Storm Titanium Bi-Metal Metal Blades (IBOAT330, IBOAT340) and One Fitâ„¢ 1-1/4" Storm Titanium Wood & Nails Blade (IBOAT336). These oscillating multi-tool blades are ideal for metal, wood & nails, wood, PVC applications, and more. Our One Fitâ„¢ anchor fits all major brands of non-Starlock tools: Milwaukee, Ridgid, Ryobi, DeWalt, Dremel, Rockwell, Makita, Craftsman, Porter-Cable, SKIL, WORX, and more! Dremel models MM45 & MM50 require the included adapter.
6" GAGE BLOCK-MIT611206>
ELKHART 101-R-3/4 X 1/4 101-R Solder Reducing Coupling, Coupling, 3/4 x 1/4 in Nominal, Solder End Style, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
