TIMING BELTS
JASON 740-5-M25 SYNCHRONOUS BELT; 5-MM PITCH; 740-MM PITCH LENGTH; 25-MM BELT WIDTH; STANDARD HTD TOOTH PROFILE; 5M; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY-JAS7405M25>
JASON 7208M30 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 720-MM PITCH LENGTH, 8-MM TOOTH PITCH, 30-MM WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY
-JAS7208M30 >
JASON 7105M09 HTB HIGH TORQUE SYNCHRONOUS BELT. CHLOROPRENE, 09MM WIDTH, 710-MM PITCH LENGTH, 5-MM TOOTH PITCH
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESISTANCE, INCREASED POWER CAPACITY-
JAS700H200>
JASON 6693M09 8-MM PITCH X 640-MM TIMING BELTS
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6693M09>
JASON 65CCB175 TIMING BELT, 65" OUTSIDE CIRCUMFERENCE, 1.5" TOP WIDTH, SINGLE RIBS
COTTON CLEANER V-BELT, SYNCHRONOUS BELT, 1 "G PITCH, 63" PITCH LENGTH, 1-3/4" BELT WIDTH, STANDARD TIMING TOOTH. CCB PROFILE, MADE OF STEEL TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JAS65CCB175 >
JASON 63CCB165 TIMING BELT, 63" OUTSIDE CIRCUMFERENCE, 1.5" TOP WIDTH, SINGLE RIBS
COTTON CLEANER V-BELT, SYNCHRONOUS BELT, 1 "G PITCH, 63" PITCH LENGTH, 1-1/2" BELT WIDTH, STANDARD TIMING TOOTH. CCB PROFILE, MADE OF STEEL TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JAS63CCB165 >
JASON 6355-M-15 5MM PITCH, 3.8MM HEIGHT, 15MM WIDTH , 635MM LENGTH, TEETH;127
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
- JAS6355M15>
JASON 6155M15 5-MM PITCH X 615-MM TIME BELTS
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE.
- JAS6155M15>
JASON 6008M30 TIMING BELT, 23.62" LENGTH X 1.18" WIDTH, 600MM PITCH LENGTH, 8MM TOOTH PITCH
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M30 >
JASON 6008M25 TIMING BELT, 23.62" LENGTH X .98" WIDTH, 600MM PITCH LENGTH, 8MM TOOTH PITCH
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M25 >
JASON 6008M20 TIMING BELT, 23.62" LENGTH X .79" WIDTH, 600MM PITCH LENGTH, 8MM TOOTH PITCH
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M20 >
JASON 6008M15 TIMING BELT, 23.62" LENGTH X .59" WIDTH
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M15 >
JASON 6008M12 TIMING BELT POWERGRIP HTD 2-MM WIDE 8-MM PITCH, 600 PITCH LENGTH, 75 TEETH
TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M12 >
JASON 600-5-M-50 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 600-MM PITCH LENGTH, 5-MM TOOTH PITCH, 30-MM WIDE
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-
JAS6005M30>
JASON 570H100 TIMING BELT 0.50 " PITCH, 1 " WIDE 57 " PITCH LENGTH,114 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS570H100>
JASON 5608M20 8-MM PITCH X 560-MM TIMING BELTS
HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE. FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE, HIGH TOOTH SHEAR RESITANCE. NYLON TOOTH COVER, DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY. COMPOUND-CHLOROPRENE, CORD-FIBERGLASS; TOOTH COVER-NYLON.
-JAS5608M20 >
JASON 540H200 TIMING BELT 0.5 " PITCH, 2 " WIDE 54 " PITCH LENGTH, 108 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS540H200 >
JASON 540H150 TIMING BELT 0.5 " PITCH,1- 1/2 " WIDE 54 " PITCH LENGTH, 108 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS540H150 >
JASON 540H100 TIMING BELT 0.5 " PITCH, 1/2 " WIDE 51 " PITCH LENGTH, 108 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TOTHE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS540H100 >
JASON 5355M15 5-MM PITCH X 15-MM TOP WIDTH X 535-MM OUTSIDE CIR. X 107 TEETH SPECIAL
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TRAPEZOIDAL TOOTH, TROUBLE FREE ALTERNATIVES TO CHAIN DRIVES. CALLED HTD FOR HIGH TORQUE DESIGN THESE BELTS HAVE METRIC PITCHES, ROUND CURVILINEAR TOOTH PROFILE INCREASES THE DISTRIBTUION OF TENSION ON THE TIMING BELT ALLOWING SIGNIFICANTLY HIGHER HORSEPOWER RATINGS. HTD TIMING BELTS ELEMINATES THE NEED FOR MAINTENANCE LIKE RELUBRICATION AND RETENSIONING, 30% INCREASE IN HORSEPOWER RATINGS, RESIST HEAVY SHOCK LOADS AND STRETCH BECAUSE IF CONTINUOUS HELICAL WOULD FIBERGLASS CORDS PROVIDING EXTREME LOAD CARRYING MUSCLE.
-JAS5355M15 >
JASON 510L075US URETHANE WITH STEEL CORD TIMING BELTS, LPITCH X 51" LENGTH X 3/4" TOP WIDTH
URETHANE WITH STEEL CORD TIMING BELT 510-L-075-US-JAS510L075US>
JASON 510H150 TIMING BELT 0.5 " PITCH, 1/2 " WIDE 51 " PITCH LENGTH, 33 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS510H150>
JASON 480L100 SINGLE SIDED TIMING BELT, L SERIES-3/8 " PITCH, 128 TEETH, 48" PITCH LENGTH, 1" WIDE
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS480L100 >
JASON 480H150 TIMING BELT 0.5 " PITCH, 1 " WIDE 48 " PITCH LENGTH, 96 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS480H150 >
Recently Viewed
DOUBLE-V V-BELT OUTSIDE CIRCUMFERENCE 124-PIXCC120 >
Gates 35 Tri-Power® Industrial V-Belts - BX Section, 21/32 in Top Width, 1 Strand, 38.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
4" OC CONDUIT 1-1/4"-APL403/4>
2-3/8"-ID BB LOW PILLOW BLOCK UNIT-MBUVPLS238>
Browning® 1108901 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 6.32 in OD, #50 Chain, 30 Teeth, 5/8 in Pitch, Steel
4" ROUND PVC BLANK ELECTRIC COVER-JWH511013 >
