TIMING BELTS

A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 13" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JAS130XL037 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS12808M50 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS1260XH300 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TP THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS1250H150 >

EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZOIDAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
JAS124L050 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS11208M50 >

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS12005M15>



- JAS12005M15>

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESiTANCE
JAS11208M36 >

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESTANCE
-JAS11208M30 >

1000H100 1/2" PITCH STANDARD TIMING BELT, MADE OF SYNTHETIC RUBBER
JAS1100H100 >

100X L100 STANDARD TIMING BELTS, CHLOROPREME, 10" LONG, 1" WIDE
-JAS100XL100 >

CONSISTENT DIMENSIONAL STABILITY, LOW PRE-TENSION, LOW NOISE, HIGH ABRASION RESISTANCE, LOW MAINTENANCE, HIGH FLEXIBILITY, LINEAR SPEEDS UP TO 80-M/SECOND.
- JAS16AT10/1500>

STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L050 >

H-PITCHX90" DOUBLE TIMING BELT-JASD900H300 >

H-PITCH X 90" DOUBLE TIMING BELTS-BRWD900H100>

H-PITCH X 85" DOUBLE TIMING BELT - JASD850H100>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H150>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H100>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H075>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H050>

H-PITCHX75" DOUBLE TIMING BELT-JASD750H100 >

H-PITCHX70" DOUBLE TIMING BELT-JASD700H200 >

L-PITCHX66 DOUBLE TIMING BELT-JASD660L150 >

L-PITCHX66 DOUBLE TIMING BELT-JASD660L100 >