JASON 480H150 TIMING BELT 0.5 " PITCH, 1 " WIDE 48 " PITCH LENGTH, 96 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS480H150 >
Recently Viewed
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS480H150 >
3M NUVO PROTECTIVE RETRO SAFETY GLASSES-MMM62060>
48" INDUSTRIAL WALL EXHAUST SHUTTERS - FANIWS48 >
Gates® Power Transmission PowerGrip® 660H300 Heavy Timing Belt, 3 in W, 66 in OAL, 1/2 in Pitch, 132 Teeth, Neoprene
The trapezoidal tooth profile of PowerGripâ„¢ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-3/8" X 2-1/2" WIDE RIM BUSHING-RBHMB108 >
JASON 3843M15 HTB TIMING BELT, SINGLE SIDED, 3MM PITCH, 384 MM PITCH LENGTH, 128 TEETH
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >
