TIMING BELTS

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY-JAS7405M25>

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY
-JAS7208M30 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXINUM FLEXIBILITY. OIL HEAT AND OZONE RESISTANCE: HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-DURABILITY AND WEAR RESISTANCE, INCREASED POWER CAPACITY-
JAS700H200>

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6693M09>

COTTON CLEANER V-BELT, SYNCHRONOUS BELT, 1 "G PITCH, 63" PITCH LENGTH, 1-3/4" BELT WIDTH, STANDARD TIMING TOOTH. CCB PROFILE, MADE OF STEEL TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JAS65CCB175 >

COTTON CLEANER V-BELT, SYNCHRONOUS BELT, 1 "G PITCH, 63" PITCH LENGTH, 1-1/2" BELT WIDTH, STANDARD TIMING TOOTH. CCB PROFILE, MADE OF STEEL TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JAS63CCB165 >

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER

- JAS6355M15>

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE.
- JAS6155M15>

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M30 >

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M25 >

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M20 >

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER INCOST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSIDE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M15 >

TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. THEY OFFER A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE.
-JAS6008M12 >

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-
JAS6005M30>

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS570H100>

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE. FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE, HIGH TOOTH SHEAR RESITANCE. NYLON TOOTH COVER, DURABILITY AND WEAR RESTANCE, INCREASED POWER CAPACITY. COMPOUND-CHLOROPRENE, CORD-FIBERGLASS; TOOTH COVER-NYLON.
-JAS5608M20 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS540H200 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS540H150 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TOTHE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS540H100 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TRAPEZOIDAL TOOTH, TROUBLE FREE ALTERNATIVES TO CHAIN DRIVES. CALLED HTD FOR HIGH TORQUE DESIGN THESE BELTS HAVE METRIC PITCHES, ROUND CURVILINEAR TOOTH PROFILE INCREASES THE DISTRIBTUION OF TENSION ON THE TIMING BELT ALLOWING SIGNIFICANTLY HIGHER HORSEPOWER RATINGS. HTD TIMING BELTS ELEMINATES THE NEED FOR MAINTENANCE LIKE RELUBRICATION AND RETENSIONING, 30% INCREASE IN HORSEPOWER RATINGS, RESIST HEAVY SHOCK LOADS AND STRETCH BECAUSE IF CONTINUOUS HELICAL WOULD FIBERGLASS CORDS PROVIDING EXTREME LOAD CARRYING MUSCLE.
-JAS5355M15 >

URETHANE WITH STEEL CORD TIMING BELT 510-L-075-US-JAS510L075US>

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS510H150>

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS480L100 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS480H150 >