POLY-V V-BELTS J-K-L-M
PIX 550-J-6 POLY RIB J V-BELT, 55" OC, 6 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J6 >
PIX 550-J-10 POLY RIB J V-BELT, 55" OC 10 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 10 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J10 >
PIX 520-J-6 POLY RIB J V-BELT, 52" OC 6 RIBS, 0.93" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX520J6 >
PIX 510-J-6 POLY RIB J V-BELT, 51" OC, 16 RIBS,1.47" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES,6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
- PIX510J6>
PIX 510-J-16 POLY RIB J V-BELT, 51" OC, 16 RIBS,1.47" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES,16 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
- PIX510J16>
PIX 500-J-6 POLY RIB J V-BELT, 50" OC, 6 RIBS, 0.092 INCH PITCH 9/16" WIDTH
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J6 >
PIX 500-J-4 POLY RIB J V-BELT, 50" OC, 4 RIBS, 0.092 INCH PITCH 0.37" WIDTH
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 4 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J4>
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 16 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J16>
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
PIX490J6 >
PIX 480-J-6 RUBBER V-BELT, PJ V-RIBBED, 16 RIBS, 48" LENGTH X 9/16" WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX480J6 >
PIX 480-J-16 RUBBER V-BELT, PJ V-RIBBED, 16 RIBS, 48" LENGTH X 1.47" WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX480J16>
PIX 480-J-10 RUBBER V-BELT, PJ V-RIBBED, 10 RIBS, 48" LENGTH X 0.92" WIDTH
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX470J10>
PIX 470-J-6 RUBBER V-BELT, PJ V-RIBBED, 6 RIBS, 47" LENGTH X 0.558" WIDTH X 0.17" HEIGHT
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED FOR PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX470J6 >
PIX 450-J-6 RUBBER V-BELT, PJ V-RIBBED, 6 RIBS, 45" LENGTH X 0.558" WIDTH X 0.17" HEIGHT
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX450J6 >
AN EXTREMELY THIN PROFILE GIVES THESE BELTS THE FLEXIBILITY TO BEND AROUND SMALL-DIAMETER PULLEYS. ALSO KNOWN AS SERPENTINE BELTS. THEY HAVE MULTIPLE BANDS THAT FUNCTION AS A SINGLE UNIT FOR CONSISTENT DRIVE PERFORMANCE AND EVEN LOAD DISTRIBUTION. THEY HANDLE SHOCK LOADS BETTER THAN STANDARD BELTS,
-PIX-PIX400J6>
PIX 400-J-10 10 RIB GROOVE POLY-V BELT. 40" LENGTH , J SERIES MICRO-V POLY-V V-BELT
BLACK RIBBED BELT RESISTANT TO OIL AND HEAT. J SECTION MICRO RIBBED V-BELTS ARE CATEGORIZED BY THEIR TOP WIDTH AND THE THICKNESS OF EACH RIB. THE TOP WIDTH IS DEPENDENT ON THE NUMBER OF RIBS, AND EACH RIB HAS A NOMINAL THICKNESS OF 5/32". THEY ARE SUITABLE FOR HIGH-SPEED DRIVE SYSTEMS SUCH AS IN WASHING MACHINES, VACUUM CLEANERS, LAWN MOWERS AS WELL AS MEDICAL EQUIPMENT.
-PIX400J10 >
PIX 390-J-6 POLY V BELT, 39" X 0.5500" BELT WIDTH, 6 RIB SERPENTINE BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
PIX390J6 >
PIX 380-J-6 V-RIBBED POLY V BELT, 6 RIBS BELT; 38" KENGTH X 0.558" WIDTH X 0.17" TOP, EPDM POLY V BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
-PIX380J6 >
PIX 380-J-4 V-RIBBED POLY V BELT, 4 RIBS BELT; 38" KENGTH X 0.37" WIDTH X 0.14" TOP, EPDM POLY V BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
-PIX380J4 >
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
-PIX360J6 >
PIX 350-J-6 V-RIBBED BELT, 6 RIBS, 35" LENGTH X 0.55" WIDTH, EPDM POLY V-BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
PIX350J6 >
PIX 320-J-6 V-6 RIBBED 32" LENGTH X 0.55" WIDTH X 0.14" HEIGHT EPDM RUBBER, MULTI WEDGE MICRO V-BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH-POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
PIX320J6 >
PIX 320-J-4 RUBBER 32" LENGTH X .037" WIDTH X .14" THICKNESS RIBBED V-BELT
MADE FROM EPDM RUBBER MATERIAL, HIGH TEMPERATURE RESISTANCE, OIL RESISTANCE, WEAR RESISTANCE, AND HIGH COEFFICIENT OF FRICTION. THE MULTI-RIB BELT OFFERS THE FLEXIBILITY OF A FLAT BELT WHILE DELIVERING THE HIGH POWER TRANSMISSION PERFORMANCE OF A TRADITIONAL V-BELT. THEY ARE FIT FOR MANY INDUSTRIAL MACHINERY, APPLIANCES, AND POWER TOOLS, SUCH AS COMPRESSORS, PUMPS, LAWNMOWERS, DRILLS
-PIX320J4 >
31.5" SERPENTINE BELT WITH 10 RIBS DESIGNED FOR OPTIMAL POWER TRANSMISSION AND DURABILITY. MADE OF PREMIUM RUBBER COMPOUND WITH REINFORCED CORD FOR ENHANCED FLEXIBILITY AND LONG LASTING PERFORMANCE. ENGINEERED FOR SMOOTH OPERATION WITH MINIMAL NOISE AND EFFICIENT POWER TRANSFER IN SERPENTINE DRIVE SYSTEMS
-PIX315K10 >
Recently Viewed
Browning® 3694262 B5V® Type 3 Multiple Sheave, 1/2 to 1-15/16 in Split Taper Bore, 6.88 in OD, 3 Grooves, 6.7 in (5V)/6.4 in (A)/6.9 in (B) Dia Pitch, 2-7/16 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. 2 square edges allow you to make grooves fixed at the same width as the file, and all sizes taper slightly in width to improve access in slots.
8-MM X 10-MM BRAKE BLEEDER WRENCH-PEFW80620 >
Browning® 1010412 B Series Type 5 Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 5-3/4 in OD, 4 Grooves, 5.2 in (A)/5.7 in (B) Dia Pitch, 3-1/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
CHICAGO PNEUMATIC A-047051 P Shank, Shank Size 0.498 Inch, Body Size 5/8 Inch, Shank Length 1-3/4 Inch, 1-5/16 in W Blade, High Grade Alloy Steel
Chicago Pneumatic offers a wide range of accessories to help you make the most of your pneumatic air tools. Our full line of tools & accessories offers the versatility, durability, and function you need for any job from the workshop to the construction site.
