PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
-PIX360J6 >
Recently Viewed
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
PIX 360-J-6 V-RIBBED BELT, 6 RIBS, 36" LENGTH X 0.55" WIDTH, EPDM POLY V BELT
-PIX360J6 >
GP® 1908F 7-Piece Socket Driver Bit, 3/8 in Hex Drive, 1/4 in, 0.63 in L Bit
V-BELTOUTSIDE CIRCUMFERENCE 44."-JAS1626V440 >
Proto® TorquePlus™ J1065M Box End Wrench, 17 x 19 mm Wrench, 12 Points, 7.5 deg Offset, 11 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
138" X 1" X 5/8" BM BANDSAW BLADE-MORBM11.6X1X5/8 >
Drillco 77A116C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
