PIX 450-J-6 RUBBER V-BELT, PJ V-RIBBED, 6 RIBS, 45" LENGTH X 0.558" WIDTH X 0.17" HEIGHT
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX450J6 >
Recently Viewed
PIX 450-J-6 RUBBER V-BELT, PJ V-RIBBED, 6 RIBS, 45" LENGTH X 0.558" WIDTH X 0.17" HEIGHT
BELT ANGLE IS APPROXIMATELY 40 DEGREES. BELTS ARE CONSTRUCTED IF HIGHLY ENGINEERED, HIGH-PERFORMANCE COMPONENTS AS SINGLE WRAPPED BELTS. THE JOINED OR BANDED BELTS ARE RECOMMENDED PULSATING DRIVES WHERE EXTRA STABILITY IS BENEFICIAL.
-PIX450J6 >
FREUDENBERG Simmering® 75022419 B1 Single Lip Oil Seal, 32 mm ID x 45 mm OD, 7 mm W, NBR Lip, 72 Durometer, Import, Transcom 45X72X7-TC
FREUDENBERG Simmering® 45X72X7TC-BX B1 Single Lip Oil Seal, 32 mm ID x 45 mm OD, 7 mm W, NBR Lip, 72 Durometer, Import
BBI 532196 Fully Threaded Round Socket Cap Screw, M12x1.75, 30 mm OAL, Alloy Steel, 12.9 Grade
BBI 532196 Fully Threaded Round Socket Cap Screw, M12x1.75, 30 mm OAL, Alloy Steel, 12.9 Grade
#16-MFF #16-FFF 90-DEG HYD/ADAPTER-DAYFS65001616>
MORSE® 14667 1396 1-Stage Type A Heavy Duty Jobber Length Aircraft Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 118 deg Point, HSS
MORSE® 58240 5942 Ball Nose Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
