BrassCraft® ProCoat® CSSL54-60 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 60 in L, Stainless Steel, Domestic
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
-
BrandBrassCraft®
-
UPC026613114378
-
Manufacturer Part NumberCSSL54-60 P
-
CountryUSA
-
FinishCoated
-
MaterialStainless Steel
-
Nominal Size1/2 in
-
SeriesCSSL54
-
Domestic/ImportDomestic
-
Outside Diameter3/8 in
-
Length60 in
-
End StyleMNPT x FNPT
- 1/4 in ID (3/8 in OD) corrugated stainless steel with corrosion resistant coating
- Ideal for low demand appliances such as dryers, decorative stoves and gas log fireplaces
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
- Smooth, burnished connector ends seal with less torque, making installation easier
- High tensile strength stainless steel is less susceptible to work hardening
- Deep corrugations enhance flexibility and maneuverability of connector during installation
- Gas connector is 100% leak tested
- Approved for indoor and outdoor use
- -40 to 150 deg F temperature
- 1/2 psi max pressure
| Cross-Reference Number |
|---|
| 443034 |
-
UNSPSC40141700
-
Package Description5/CTN
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
BrassCraft® ProCoat® CSSL54-60 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 60 in L, Stainless Steel, Domestic
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Browning® 767507 VPS 300 Medium Duty Pillow Block Ball Bearing, 1-15/16 in Dia Bore, 6-7/16 to 7-7/16 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8-13/16 in OAL x 4-31/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
B-Line B2017SS4 B2000 2-Piece Conduit/Pipe Clamp, 4 in Conduit, Stainless Steel
B-Line has long been a leading manufacturer of support systems and electrical enclosures for the mechanical, electrical and telecommunications industries. Our Spring Steel Fastener line includes a wide range of quality fastening systems for electrical, mechanical and telecommunication applications. Our Spring Steel Fasteners include products for attachment to metal studs, steel beams, acoustical tee, drywall, purlins, and channel.
UNIQUE PURPLE FORMULA EASILY CUTS THROUGH GREASE, GRIME AND WINDOW FILM WITHOUT STREAKING. ALCOHOL AND AMMONIA-FREE FORMULA WILL NOT HARM, ETCH, DRY OUT OR PIT SURFACES. PERFECT FOR USE ON WINDOWS, MIRRORS, PLEXIGLASS, CHROME, COUNTERTOPS, AND STAINLESS STEEL. LEAVES NO STREAKS.
-JWH647349>
Dixon® 4PS6 Dual-Lock™ P Series Interchange Thor Interchange Coupler, 1/2 x 3/4 in Nominal, Hose Barb x Coupler End Style, Steel, Trivalent Chrome
Dixon® 4PS6 Dual-Lock™ P Series Interchange Thor Interchange Coupler, 1/2 x 3/4 in Nominal, Hose Barb x Coupler End Style, Steel, Trivalent Chrome
Milton VS-404 200 PSI Tire Valve Core, Properly inflated tires can contribute to better fuel efficiency Maintaining correct tire pressure with help of valve cores Maintains appropriate tire pressure
These valve cores are made of nickel plated brass with a thread size of 0.2108-36 and a red PTFE seal. These valve cores meet specification TR C1. Valves have a pressure operating range of 0 to 200 psi.
