BrassCraft Manufacturing
BrassCraft® G2R10X C1 1/4 Turn Water Supply Stop, 3/8 in Nominal, FNPT x Compression, 125 psi, Brass Body, Polished Chrome, Domestic
BrassCraft 3/8 in FIP Inlet x 3/8 in OD Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
BrassCraft® ProCoat® CSSC44-60 P Gas Connector, 1/2 in, MNPT, 60 in L, Stainless Steel
BrassCraft® ProCoat® CSSC44-60 P Gas Connector, 1/2 in, MNPT, 60 in L, Stainless Steel
BrassCraft® ProCoat® CSSD54-18 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 18 in L, Stainless Steel
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
BrassCraft® ProCoat® CSSL54-60 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 60 in L, Stainless Steel, Domestic
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
BrassCraft® ProCoat® CSSTNN-16N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 16 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
BrassCraft® ProCoat® CSSTNN-22N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 22 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
BrassCraft® ProCoat® CSSTNN-34N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 34 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
BrassCraft® SF0043X Small Diameter Aerator Adaptor Snap Nipple, For Use With SF0041 and SF0079 Faucet Aerator, Brass, Polished Chrome, Import
BrassCraft® SF0043X Small Diameter Aerator Adaptor Snap Nipple, For Use With SF0041 and SF0079 Faucet Aerator, Brass, Polished Chrome, Import
Cobra® PST112 Pipe Saw, 18 in L Steel Blade, Plastic Handle
Cobra® PST112 Pipe Saw, 18 in L Steel Blade, Plastic Handle
Cobra® PST127 Replacement Blade, For Use With 18 in PVC Saw
Cobra® PST127 Replacement Blade, For Use With 18 in PVC Saw
Cobra® PST142 Internal Pipe Wrench, 3/8 in, 6 in L
Cobra® PST142 Internal Pipe Wrench, 3/8 in, 6 in L
Dormont® SafetyShield® 0242482 20C, 20C-3132-24B Gas Connector, 3/8 in Nominal, 1/2 in MNPT x 1/2 in FNPT End Style, 85000 Btu/hr Natural Gas, 136000 Btu/hr Liquid Propane Flow Rate, 24 in L, 304 Stainless Steel
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch FIP adapters and is 24 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Item comes in a bag.
Dormont® SafetyShield® 0242483 20C, 20C-3132-48B Gas Connector, 3/8 in Nominal, 1/2 in MNPT x 1/2 in FNPT End Style, 60500 Btu/hr Natural Gas, 96800 Btu/hr Liquid Propane Flow Rate, 48 in L, 304 Stainless Steel
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch MIP adapters and is 48 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Item comes in a bag.
Dormont® SafetyShield® 0243453 10C, 10C-3132-18B Gas Connector, 1/4 in Nominal, 1/2 in MNPT x 1/2 in FNPT End Style, 43800 Btu/hr Natural Gas, 70080 Btu/hr Liquid Propane Flow Rate, 18 in L, 304 Stainless Steel
This 3/8 inch OD, 1/4 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch FIP adapters and is 18 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as space heaters and wall heaters. Item comes in a bag.
Recently Viewed
GEARWRENCH® 3626 Ratcheting Puller, 7 ton Capacity, 2 or 3 Jaws, 6-3/4 in Max Reach, 10 in Max Spread
Since our beginning, GEARWRENCH automotive specialty tools have been driven by innovation. From our first specialty tool, the Model-T valve spring lifter, to our latest ratcheting puller, we’ve built our reputation with tools that make tough jobs easy. Most of our products have been upgraded with new improved features like dual material handles designed for a more comfortable grip or dual dipped handles on pliers providing more cushion for your hands. GEARWRENCH automotive specialty tools are proudly made with the finest components under the most stringent manufacturing guidelines. Made for everyday use – guaranteed for life. Better tools mean easier, more efficient work so we constantly evaluate automotive engineering trends allowing us to consistently improve and enhance our tools to better fit professional hands. That’s why they are the first choice for thousands of automotive technicians worldwide.
The Crescent Wiss® All-Purpose Snips have serrated blades and compound action cutting. These Snips are designed for many applications in trade work, such as cutting screening, shingles, or carpeting. Cut any direction through light-gauge metal, vinyl, leather, or other medium-duty materials, and keep cutting longer with the spring-action mechanism and non-slip textured grips.
GEARWRENCH® 3562D Combination Mechanical Puller, 5 ton Capacity, 2 or 3 Jaws, 5-3/4 in Max Reach, 8 in Max Spread
Since our beginning, GEARWRENCH automotive specialty tools have been driven by innovation. From our first specialty tool, the Model-T valve spring lifter, to our latest ratcheting puller, we’ve built our reputation with tools that make tough jobs easy. Most of our products have been upgraded with new improved features like dual material handles designed for a more comfortable grip or dual dipped handles on pliers providing more cushion for your hands. GEARWRENCH automotive specialty tools are proudly made with the finest components under the most stringent manufacturing guidelines. Made for everyday use – guaranteed for life. Better tools mean easier, more efficient work so we constantly evaluate automotive engineering trends allowing us to consistently improve and enhance our tools to better fit professional hands. That’s why they are the first choice for thousands of automotive technicians worldwide.
Crescent® M6M7R Aviation Snip, 18 ga Cutting, Left/Right/Straight Snip, Ergonomic/Non-Slip Grip
The set contains Crescent Wiss® (1) Left and Straight Cut Aviation Snip and (1) Right and Staight Cut Aviation Snip. Their 30 degree angle offset allows for greater material low while cutting straight lines and left/right arcs. The made in USA snips cut up to 18 gauge low carbon, rolled steel. They are tested up to 500,000 cuts and engineered for superior performance.
