Dormont® SafetyShield® 0243632 30C, 30C-3131-36B Gas Connector, 1/2 in Nominal, 1/2 in MNPT End Style, 125000 Btu/hr Natural Gas, 200000 Btu/hr Liquid Propane Flow Rate, 36 in L, 304 Stainless Steel
This 5/8 inch OD, 1/2 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch MIP adapters and is 36 inches in length. This CSA approved SafetyShield(R) gas connector has a premium antimicrobial coating for increased safety, durability, and longevity. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces. Item comes in a bag.
-
BrandDormont®
-
UPC662447110997
-
Manufacturer Part Number0243632
-
CountryUSA
-
FinishYellow Coated
-
Material304 Stainless Steel
-
Flow Rate125000 Btu/hr Natural Gas, 200000 Btu/hr Liquid Propane
-
Nominal Size1/2 in
-
Series30C
-
Outside Diameter5/8 in
-
Length36 in
-
End Style1/2 in MNPT
- 100 Percent factory leak tested
- Durable and corrosion-resistant
- Premium antimicrobial coating for increased safety, durability, and longevity
-
Alternative Part Number30C-3131-36B
-
UNSPSC40141720
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Z21.24/CSA 6.10|ANSI Z21.75/CSA 6.27|ASTM A240|cSAus Certified|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-
WarrantyLimited lifetime warranty
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Dormont® SafetyShield® 0243632 30C, 30C-3131-36B Gas Connector, 1/2 in Nominal, 1/2 in MNPT End Style, 125000 Btu/hr Natural Gas, 200000 Btu/hr Liquid Propane Flow Rate, 36 in L, 304 Stainless Steel
This 5/8 inch OD, 1/2 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch MIP adapters and is 36 inches in length. This CSA approved SafetyShield(R) gas connector has a premium antimicrobial coating for increased safety, durability, and longevity. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces. Item comes in a bag.
2" X 800" PACKAGE SEALING TAPE - JWH971764 >
Milwaukee® HAMMERVAC™ 4253-1 Keyed Magnetic Motor, For Use With Electromagnetic Drill Press
Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.
Milwaukee® 4297-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 500 rpm No Load, 1-1/4 in Drill Capacity, 1-3/16 in Chuck Size, 8 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
