Cast Iron Pipe Fittings
Anvil® 0318907763 Pipe Bushing, 2 x 1 in Nominal, Cast Iron, Black Oxide, Domestic
Extra strong, expertly cast iron is at the heart of Ward Fittings quality. From laboratory to foundry, raw materials undergo strict metallurgical and processing controls, chemical analysis and inspection to produce closely grained, high-tensile, non-porous iron. Generations of expertise and rigorous quality control results in durable yet precise cast and malleable iron fittings and components that meet or exceed national and industry standards - and the needs of contractors around the world who believe that down to the last detail, quality counts.
Anvil® 0318905528 FIG 383 Hex Head Pipe Bushing, 1/2 x 1/4 in Nominal, MNPT x FNPT End Style, 300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0318905486 FIG 383 Hex Head Pipe Bushing, 1/2 x 3/8 in Nominal, MNPT x FNPT End Style, 150/300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0318905361 FIG 383 Hex Head Pipe Bushing, 1/4 x 1/8 in Nominal, MNPT x FNPT End Style, 150/300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0318901600 Square Head Solid Plug, 3/4 in Nominal, MNPT End Style, 125 lb, Merchant Steel, Black Oxide, Domestic
Anvil standard and extra heavy cast iron threaded fittings are manufactured in accordance with ASME-B16.4 (except plugs and bushings, ASME B16.14). Dimensions also conform to Federal Specifications, WW-P-501 (except plugs and bushings WW-P-471). Cast iron threaded fittings are available in both black and galvanized.
Anvil® 0318901568 Square Head Solid Plug, 1/2 in Nominal, MNPT End Style, 125 lb, Merchant Steel, Black Oxide, Domestic
Anvil standard and extra heavy cast iron threaded fittings are manufactured in accordance with ASME-B16.4 (except plugs and bushings, ASME B16.14). Dimensions also conform to Federal Specifications, WW-P-501 (except plugs and bushings WW-P-471). Cast iron threaded fittings are available in both black and galvanized.
Recently Viewed
HVBS-7-MW BANDSAW JETHVBS7MW126
GUARD FOR HVBS-7-MW BANDSAW
6" SCH-80 PVC MALE ADAPTER-NIB836060 >
The Crosby H-323 3/8" is a heavy-duty, forged carbon steel eye grab hook primarily utilized for securing loads, tie-downs, and industrial chain configurations. Manufactured by The Crosby Group, this hook is distinctively designed without a cradle or wrapping support, allowing it to firmly pinch and grab standard 3/8-inch transport chains.
10-24" X 3/8" Stainless Steel Socket Head Set Screws
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
BBI 898368 Wood Screw, #8, 2 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
