Anvil® 0318905361 FIG 383 Hex Head Pipe Bushing, 1/4 x 1/8 in Nominal, MNPT x FNPT End Style, 150/300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
-
BrandAnvil®
-
UPC690291347337
-
Manufacturer Part Number0318905361
-
CountryUSA
-
Temperature Rating-20 to 150 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Fitting/Connector TypeBushing
-
Pressure Class150/300 lb
-
TypeHex Head
-
Nominal Size1/4 x 1/8 in
-
SeriesFIG 383
-
Domestic/ImportDomestic
-
End StyleMNPT x FNPT
-
Thickness0.14 in
-
Pressure Rating300 psi
-
Hex Size0.64 in
- Small Steel Fittings to ASME C1215
- Wide range of products for sprinkler systems, drainage systems other installations, including fittings, connectors, unions, plugs and bushings, clamps and more
- Accurate form, length and straightness on threads for easy engagement
- Chamfered openings for fast, easy engagement and assembly
- Precision machining
- Rust-Resistant coating
- 0.14 in H of head
- 0.26 in internal x 0.44 in L external thread
- 0.64 in W of head
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 66285 |
-
UNSPSC40172303
-
Standards/ApprovalsASME B16.3|cULus Listed|FM Approved|NSF/ANSI 61|ANSI B16.14/B1.20.1|ASME B16.3/B1.20.1/B16.14|ASTM A153/A197|FM Approved|NSF 61-G|UL/ULC Listed|WW P471
-
Alternative Part NumberBXA.BSB
-
Package Description25/BX
-
Specification Sheet
-
Catalog
Recently Viewed
Anvil® 0318905361 FIG 383 Hex Head Pipe Bushing, 1/4 x 1/8 in Nominal, MNPT x FNPT End Style, 150/300 lb, Cast Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Dixon® DCP3823 Air Chief ARO Quick Connect Plug, 3/8 in Nominal, Quick Connect Plug x FNPT, 300 psi Pressure, Steel, Domestic
Dixon® DCP3823 Air Chief ARO Quick Connect Plug, 3/8 in Nominal, Quick Connect Plug x FNPT, 300 psi Pressure, Steel, Domestic
SINGLE REDUCTION CAST IRON HOLLOW OUTPUT, 15:1 RATIO-BRW206UH15 >
Arlington LPCG754 Low Profile Liquidtight Oiltight Strain Relief Cord Connector, 3/4 in Trade, 0.24 to 0.472 in Cable Openings, Nylon/Polyethylene/Santoprene™/Zinc
Arlington low profile cord connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the industry, so there are fewer items to stock. a liquidtight seal and superior pullout resistance is accomplished by just tightening the nut. a sealing ring is furnished to assure a liquidtight seal when installing in non-threaded openings.
HCI Preferred Supplier 28546 Hose Plug, 1/4 in Nominal, MNPT, 250 psi Pressure, Steel
HCI Preferred Supplier 28546 Hose Plug, 1/4 in Nominal, MNPT, 250 psi Pressure, Steel
