WERNER 12' 300# 1-A D-RUNG F/GLS LADDERS WER D-6212-1
The D6212-1 ladders are one section straight ladders made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 300 lb making them durable and long lasting. The TRACTION-TRED® D-rungs are slip resistant, and the durable rail shields and shoe brackets help to protect the rails from damage. The dual action feet pivot for use on hard or penetrable surfaces.
-
BrandWERNER®
-
UPC051751032215
-
Manufacturer Part NumberD6212-1
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Top Step Height12 ft
-
Top to Bottom Rung11 ft
-
TypeType IA Duty Single Section
-
Rung Diameter1-1/2 in
-
Rung Spacing12 in
-
Rung TypeD-Rung
-
Rung Width1-5/8 in
-
SeriesD6200-1
-
Number of Rungs12
-
Overall Height12 ft
-
Overall Width19 in
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-5/8 in slip resistant TRACTION-TRED® D-rungs
- Pre-pierced holes for easy field installation of accessories
- Combination rail shield bracket and shoe with SHU-LOK® and slip resistant pad
- Molded rung braces on bottom step for increased durability
- Mar resistant molded end caps
- 1 section
- 15 ft H reach
- 12 ft L open extended
- 12 ft L closed
- 3-5/16 in rails
- 1-3/16 in flange
- 16 in W fly
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The D6212-1 ladders are one section straight ladders made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 300 lb making them durable and long lasting. The TRACTION-TRED® D-rungs are slip resistant, and the durable rail shields and shoe brackets help to protect the rails from damage. The dual action feet pivot for use on hard or penetrable surfaces.
Bando Rib Ace® 12PK1750 Automotive Serpentine V-Ribbed Belt, PK Section, 1.68 in W Top, 1750 mm L Outside, 0.175 in THK, Rubber
Trusted by the world's Top Automakers, Bando is OE on Domestic and Import nameplates. V-ribbed belt is precision engineered for long life under severe operating conditions. Used on standard V-ribbed pulley and serpentine drives.
Pyramex® S2515S Lightweight Safety Eyewear, Anti-Scratch, Coffee Lens, Plastic Frame, Polycarbonate Lens, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Milwaukee® 3107-6 Grounded Right Angle Drill Kit, 1/2 in Keyed Chuck, 120 V AC, 500 rpm Speed, 16-3/4 in OAL
1/2 in. trigger speed control reversing. 7.0 amp Milwaukee built motor. Helical cut, heat treated gears with durable, glass reinforced nylon handle. Reversing with all ball and roller bearings. Right angle drill features head and handle swivel 360 deg., can be locked tight in any position. Kit includes tool, open end wrench, 3/16 in. socket wrench, chuck remover bar, side handle and impact resistant carrying case.
IDC Select® IDC M-2-15/16 Finished Bore QD® Bushing, 2-15/16 in Dia Bore, 6-1/2 in Dia Barrel, 9 in Dia Flange, 6-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Dichtomatik 75102156 O-Ring, 234 Dash Number, 2.984 in ID x 3.262 in OD, FKM, 75 Shore A Durometer, Import, Custom 234-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
