Torrington 1-1/8"-ID NEEDLE BEARINGS TOR HJ-182620
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790212116
-
Manufacturer Part NumberHJ-182620
-
CountryUSA
-
Load Capacity10100 lbf Dynamic/15800 lbf Static
-
Cage MaterialSteel
-
Temperature Rating250 deg F
-
Maximum Speed10000 rpm Grease/16000 rpm Oil
-
Closure TypeOpen
-
TypeCaged Heavy Duty
-
Width1-1/4 in
-
SeriesHJ Inch Series
-
Outside Diameter1-5/8 in
-
Bore Diameter1-1/8 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
-
Alternative Part NumberHJ182620PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
BATTERY CHARGER CLAMPS--PACKAGE OF 2 Heavy duty insulated battery charger clamps with alligator-style copper plated jaws.
BBI 898414 Wood Screw, #10, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
RED AND BLACK BATTERY CLAMPS--PACKAGE OF 2 Copper-plated tune-up clamps. Fine quality, copper-plated battery and tune-up replacement clip.
Milwaukee® M12 FUEL™ 2486-20 Cordless Die Grinder, 12 V, Li-Ion Battery, Black/Red
The MILWAUKEE® M12 FUEL™ 1/4" Straight Die Grinder is designed to replace pneumatic die grinders. The die grinder delivers up to .3 HP performance to outperform pneumatic die grinders by 20%. The M12™ inline die grinder has 3-Mode RPM control and a responsive variable-speed trigger providing unmatched control with most common accessories. The cordless die grinder provides greater access and mobility, eliminating the frustrations of hoses and compressors.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
