Manual Chain Hoists
Southwire® Sumner PCB050C30 Premium Low Headroom Chain Block Hoist With 30 ft Chain Fall, 0.5 ton Load
The 1/2 Ton Chain Hoist with a 30’ Chain Fall is designed to work in light industrial applications and has the capacity for 1/2-10 tons. It features a fused brake design. Its 360° alloy steel hooks make for flexible use on the job. The heat-treated load plates and internal components make for long-term durability. Additionally, this hoist complies with ANSI/ASME and OSHA standards.
Recently Viewed
CM® 657719 Clevlok® Herc-Alloy® Sling Hook With Latch, 3/8 in Trade, 8800 lb Load, 80/100 Grade, Steel Alloy
CM® 657719 Clevlok® Herc-Alloy® Sling Hook With Latch, 3/8 in Trade, 8800 lb Load, 80/100 Grade, Steel Alloy
Justrite® 08300 Horizontal Drum Vent, 2 in NPT/NPS Bung, For Use With 205 L Petroleum Based Solvent Drums, Brass, Brass
Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.
Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise
Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise
Proto® J848HD Heavy Duty Straight Pipe Wrench, 48 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Proto® J848HD Heavy Duty Straight Pipe Wrench, 48 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
CM® 659728 Clevlok® Herc-Alloy® Grab Hook, 1/2 in Trade, 15000 lb Load, 80/100 Grade, Cradle Attachment, Steel Alloy
CM® 659728 Clevlok® Herc-Alloy® Grab Hook, 1/2 in Trade, 15000 lb Load, 80/100 Grade, Cradle Attachment, Steel Alloy
Proto® J836HD Heavy Duty Straight Pipe Wrench, 36 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Proto® J836HD Heavy Duty Straight Pipe Wrench, 36 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
