Jet Tools 1-TON 20'-LIFT HAND CHAIN HOISTS JET 101912
Jet® S90 series hand chain hoists were designed with reliability and durability to perform in light duty industrial applications. Easily maintained and serviced, the Jet® S90 is available in capacities from 1/2 ton to 10 ton and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). The Jet® S90 is the ideal contractor grade hoist.
-
BrandJET®
-
UPC731325218855
-
Manufacturer Part NumberJT9-101912
-
CountryUSA
-
Load Capacity1 ton
-
Pull to Lift Rated Load60 lb
-
Minimum Between Hooks12 in
-
SeriesS90
-
Brake TypeDual Pawl Weston
-
Lifting Height20 ft
- Weston style dual pawl brake system- double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 deg for easy rigging
- Hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Needle bearing design promotes long hoist life with low wear reducing downtime
- Heat treated load plates- heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 80 load chain grade 80 black oxide coated load chain for durability
- All steel construction impact resistant covers that provide durability and protection
- Compact design smaller body and lightweight design for low headroom applications and use in confined areas
- Certification- load tested to 125% of capacity with certificate
- 53 ft chain overhau
-
Alternative Part Number101912
-
UNSPSC24101602
-
Standards/ApprovalsANSI/ASME B30.16
-
Specification Sheet
Recently Viewed
Jet® S90 series hand chain hoists were designed with reliability and durability to perform in light duty industrial applications. Easily maintained and serviced, the Jet® S90 is available in capacities from 1/2 ton to 10 ton and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). The Jet® S90 is the ideal contractor grade hoist.
2-GRV 3-V-BELT QUICK DISCONNECT JA-BUSH SHEAVES-IDC2/3V0235JA >
MORSE® 44571 4581 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 hp peak with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 to 14 in Dia.
RESIST SHEDDING, RUST, AND CORROSION. ESSENTIAL MAINTENANCE ITEM FOR BOATERS SEEKING TO MAINTAIN BEAUTIFUL WOOD AND BRIGHT WORK.
- JWH773530>
Nylox® 03809 Reusable Arbor Adapter, 1/2 in ID x 2 in OD, Metal
