Jet Tools 1-TON 30'-LIFT HAND CHAIN HOISTS JET 101913
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
-
BrandJET®
-
UPC731325218862
-
Manufacturer Part NumberJT9-101913
-
CountryUSA
-
Load Capacity1 ton
-
Pull to Lift Rated Load60 lbf
-
TypeContractor Grade
-
SeriesS90
-
Brake TypeDual Pawl Weston
-
Lifting Height30 ft
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 80 black oxide coated load chain for durability
- Impact resistant covers that provide durability and protection
- Needle bearing design promotes long hoist life with low wear reducing downtime
- Smaller body and lightweight design for low headroom applications and use in confined areas
- 53 ft hand chain overhaul to lift load 1ft
- 1 number of fall
- 12 in headroom
- 6 x 18 mm load chain
-
Alternative Part Number101913
-
UNSPSC24101600
-
Standards/ApprovalsANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Recently Viewed
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
HCI Preferred Supplier 2406168 Reducer/Expander, 1-5/16-12 x 3/4-16 Nominal, SAE 37 deg Female JIC Flare x Male JIC Flare, Steel
HCI Preferred Supplier 2406168 Reducer/Expander, 1-5/16-12 x 3/4-16 Nominal, SAE 37 deg Female JIC Flare x Male JIC Flare, Steel
Browning® 767764 VPE 100 Intermediate Duty Pillow Block Ball Bearing, 3/4 in Dia Bore, 3-3/8 to 4-3/16 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL x 2-17/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
1/2" -MALE PIPE THREADX2-1/2" BLACK NIPPLE-FIT1/2X21/2BN >
2" -MPT X 3" GALVANIZED NIPPLES-JPW2X3GN>
Coilhose® NC0610-100N Metric Nylon Tubing, 4 mm ID x 6 mm OD x 100 ft L, 1 mm THK Wall, Domestic
Coilhose® NC0610-100N Metric Nylon Tubing, 4 mm ID x 6 mm OD x 100 ft L, 1 mm THK Wall, Domestic
