JET® JT9-101920 S90 Light Duty Manual Chain Hoist, 1.5 ton Load, 10 ft H Lifting, 14-1/2 in Min Between Hooks, 1.9 in Hook Opening, 84 lb Rated
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
-
BrandJET®
-
UPC731325218879
-
Manufacturer Part NumberJT9-101920
-
CountryUSA
-
Load Capacity1.5 ton
-
Pull to Lift Rated Load84 lb
-
Minimum Between Hooks14-1/2 in
-
TypeLight Duty
-
SeriesS90
-
Hook Opening1.9 in
-
Dimensions6 in W
-
Brake TypeDual Pawl Weston
-
Lifting Height10 ft
- Weston style dual pawl brake system- double pawl design increases safety
- Alloy steel hooks- industrial rated hooks rotate 360 deg for easy rigging
- Hooks slowly stretch to indicate an no-slip situation increasing jobsite safety
- Needle bearing design- promotes long hoist life with low wear reducing downtime
- Heat treated load plates- heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 80 load chain- grade 80 black oxide coated load chain for durability
- All steel construction- impact resistant covers that provide durability and protection
- Compact design- smaller body and light weight design for low headroom applications and use in confined areas
- 8 x 24 mm load chain
-
Alternative Part Number101920
-
UNSPSC24101602
-
Standards/ApprovalsOSHA Compliant|ANSI/ASME B30.16|HST-2
-
Owners/User Manual
Recently Viewed
JET® JT9-101920 S90 Light Duty Manual Chain Hoist, 1.5 ton Load, 10 ft H Lifting, 14-1/2 in Min Between Hooks, 1.9 in Hook Opening, 84 lb Rated
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
Coilhose® 636-S 600 Blow Gun, Extended Safety Tip, 150 psi Working, 36 in L Tube, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Domestic
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Since 1823, Norton® has been the leading supplier of conventional and diamond benchstones, waterstones, sharpening systems, files, slips and specialty stones for industrial, commercial and DIY sharpening applications. Our comprehensive line of sharpening and finishing products is the industries broadest line with premier performance and quality.
MCR Safety 9667S 9667 Regular Weight General Purpose Gloves, Straight Thumb Style, PVC Palm, 7 ga 60% Cotton/40% Polyester, Brown/Natural, Knit Wrist Cuff, Resists: Abrasion, Unlined Lining
Whether you select 2-sided PVC dots or single sided, you will increase the grip and abrasion-resistance. The 9667 series features a 7-gauge 60% cotton / 40% polyester economy weight shell with PVC dots on both sides of the glove. It also features PVC on and tips of fingers.
HCI Preferred Supplier 18070 Tube Union, 3/4 in Nominal, Compression End Style, Brass
HCI Preferred Supplier 18070 Tube Union, 3/4 in Nominal, Compression End Style, Brass
