1-1/2-TON 15' - LIFT CHAIN HOISTS JET101315
JET® L-100 Series Hand Chain Hoist is designed with all steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection that prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
-
BrandJET®
-
UPC731325170528
-
Manufacturer Part NumberJT9-201115
-
CountryUSA
-
Load Capacity1.5 ton
-
Pull to Lift Rated Load77 lbf
-
SeriesL-100
-
Brake TypeDual Pawl Weston
-
Lifting Height15 ft
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Slip clutch design increases safety and overload protection by preventing lifting or pulling damaging loads
- Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- Load plates are heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Sealed ball bearing design increases efficiency and promotes smooth operation
- Patented fused brake design proven durability that increases safety with a lifetime replacement warranty
- Cast steel safety latches offer increased durability with heavy duty safety latches secured with Allen screws and lock nuts
- 57 ft hand chain overhaul to lift load 1ft
- 1 number of fall
- 13-3/4 in headroom
- 7.1 x 21 mm load chain
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0552375 |
-
Alternative Part Number201115
-
UNSPSC24101600
-
Standards/ApprovalsANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Recently Viewed
JET® L-100 Series Hand Chain Hoist is designed with all steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection that prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
MasterDrive 3535-2.5/16 3535 3 Socket Tapered Bushing, 2.31 in Dia Bore, 4.83 in Dia Barrel, 5 in OAL, Cast Iron
TB (Taped Lock Style) Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design without flanges and utilize screws to tighten on the shaft. Their compact design makes them convienent in many applications that are space-constrained. Each TB Bushing size is produced in a number of different finished bore options that include a keyway, as well as a minimum plain bore option. This allows users flexibility when using TB style sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Martin timing pulleys are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, QD bushed styles depending on size and pitch. Synchronous sprockets are non-slip toothed drives that require no lubrication. These sprockets have a wide speed range, are very efficient and make less noise than chain drives. Teeth on the belts are molded to conform with and engage the teeth on a mating sprocket.
Gates® Power Transmission Super HC® PowerBand® 12/5V1400 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 140 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
MCR Safety S2112AF Blackjack®Plus Safety Glasses, Duramass® Anti-Fog, Gray Lens, Frameless Frame, Polished Chrome, Metal Frame, Polycarbonate Lens, ANSI Z87+, AS/NZS 1337.1
S21 Series Resilient Spring Hinge Temples Soft Non-Slip Temple Material Universal Nose Bridge Frameless design with metal alloy hybrid temples Stay safe with the S21 Series from MCR Safety. Accidents happen when people remove their glasses, but with these sleek, style-conscious safety glasses, you'll wear them all day! The S21 features a frameless lens design that provides an unobstructed view, metal temples, and non-slip temple sleeves. Choose the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
