Louisville® GSW2412 GSW2400 Rolling Warehouse Ladder, 12 ft Ladder, 450 lb Load, 120 in x 10 in Platform
Louisville® GSW2412 GSW2400 Rolling Warehouse Ladder, 12 ft Ladder, 450 lb Load, 120 in x 10 in Platform
-
BrandLouisville®
-
UPC728865087911
-
Manufacturer Part NumberGSW2412
-
CountryUSA
-
Load Capacity450 lb
-
Platform Depth10 in
-
Platform Height120 in
-
Climbing Angle56 deg
-
ColorBlack
-
SeriesGSW2400
-
Number of Steps12
-
Ladder Height12 ft
-
Step Depth7 in
-
Step Width24 in
- Four spring loaded casters on 2-step to 5-step models
- Casters retract when load is placed on the ladder, setting the ladder firmly in place on rubber tips
- When the load is removed, springs push down the casters enabling the ladder to move about freely
- Models 6-step and taller come equipped with a large 4 in swivel caster in front and rigid casters in the rear
- Stepping on bottom step activates the locking mechanism, locking rubber tipped feet in down position to move the ladder, just step on the unlocking pedal
- The top platform on models 12-step and taller is surrounded on three sides by a 4 in high toe board
- Premium power paint
- Steel materia
-
UNSPSC26120000
-
Standards/ApprovalsANSI A14.7|OSHA Compliant
Recently Viewed
Louisville® GSW2412 GSW2400 Rolling Warehouse Ladder, 12 ft Ladder, 450 lb Load, 120 in x 10 in Platform
Louisville® GSW2412 GSW2400 Rolling Warehouse Ladder, 12 ft Ladder, 450 lb Load, 120 in x 10 in Platform
Greenlee® Slug-Buster® K2P-1/2 Round Knockout Punch, 0.89 in Dia Cutting, 1/2 in Conduit/Pipe
Greenlee® Slug-Buster® K2P-1/2 Round Knockout Punch, 0.89 in Dia Cutting, 1/2 in Conduit/Pipe
SIZE-#4 ARTIST BRUSH--CARDED-JWH790877 >
YELLOW RETRACTABLE BLADE UTILITY KNIFE-LUT82YEL >
Apex® AM-04-3 Socket Head Power Drive Bit, 1/8 in Hex Point, 3 in OAL, Steel
Drillco 31E180DC 3100E Adjustable Round Split Die, M18x2.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
