Simpson Strong-Tie
Simpson Strong-Tie® TP15 Tie Plate, 5 in L x 1-13/16 in W x 20 ga THK, Steel, Galvanized
Simpson Strong-Tie® straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.
Simpson Strong-Tie® QDEXTG2-16 Quik Drive® Short Standard Extension, For Use With G2 Series Auto Feed Screw System, 16 in L
From nose clips to screw quivers, Simpson Strong-Tie provides a variety of accessories for Quik Drive auto feed systems.
Simpson Strong-Tie® LUS28 Double-Shear Face-Mount Joist Hanger, 2 x 8 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS26 Double-Shear Face-Mount Joist Hanger, 2 x 6 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS24 Double-Shear Face-Mount Joist Hanger, 2 x 4 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS210 Double-Shear Face-Mount Joist Hanger, 2 x 10 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LRU26Z Face-Mount Rafter Hanger, 2 x 6 in Joist, 18 ga, Steel, ZMAX® Galvanized
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
Simpson Strong-Tie® DWA3G2 Quik Drive® Standard Adapter, For Use With DeWALT® 969 Cordless, 267 and 268 Adjustable Torque Screwguns
Simpson Strong-Tie® DWA3G2 Quik Drive® Standard Adapter, For Use With DeWALT® 969 Cordless, 267 and 268 Adjustable Torque Screwguns
Recently Viewed
Gateway Safety® Venom® 675 Replacement Faceshield Visor, Clear, Polycarbonate, 9 in H x 15-1/2 in W x 1/16 in THK Visor, For Use With 677 Head Gear and 682 Cap Adapter, ANSI Z87.1, CSA Z94.3, cULus Listed
Gateway Safety® Venom® 675 Replacement Faceshield Visor, Clear, Polycarbonate, 9 in H x 15-1/2 in W x 1/16 in THK Visor, For Use With 677 Head Gear and 682 Cap Adapter, ANSI Z87.1, CSA Z94.3, cULus Listed
Proto® J5444A Standard Length Drag Link Socket Bit, 1/2 in Drive, 3/4 in
9/32" 15/75-D MDGT OE ANGLE WRENCH-ARS27909>
The Diamond Products 05441 (also cataloged as BP1500) is a 1-1/2" Premium Black Wet Core Bore Bit engineered for professional-grade concrete drilling applications. It features a high diamond concentration optimized to deliver maximum footage and fast cutting speeds through heavily reinforced materials.
GEARWRENCH offers a wide range of impact products in open stock & sets that are designed to deliver the performance and strength that the professional users require. They are made from chrome molybdenum alloy steel for exceptional strength and durability. Our sockets have a manganese phosphate coating to resist corrosion. The sockets also feature highly visible laser etched markings and a secondary size hard stamping. The sockets feature off-corner loading to reduce fastener rounding. The GEARWRENCH impact product family will allow the professional user to FORGE AHEAD.
Charlotte PVC 00100 1000, 2 in nominal, Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
