Simpson Strong-Tie
Simpson Strong-TieĀ® TP15 Tie Plate, 5 in L x 1-13/16 in W x 20 ga THK, Steel, Galvanized
Simpson Strong-TieĀ® straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.
Simpson Strong-TieĀ® QDEXTG2-16 Quik DriveĀ® Short Standard Extension, For Use With G2 Series Auto Feed Screw System, 16 in L
From nose clips to screw quivers, Simpson Strong-Tie provides a variety of accessories for Quik Drive auto feed systems.
Simpson Strong-TieĀ® LUS28 Double-Shear Face-Mount Joist Hanger, 2 x 8 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-TieĀ® LUS26 Double-Shear Face-Mount Joist Hanger, 2 x 6 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-TieĀ® LUS24 Double-Shear Face-Mount Joist Hanger, 2 x 4 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-TieĀ® LUS210 Double-Shear Face-Mount Joist Hanger, 2 x 10 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-TieĀ® LRU26Z Face-Mount Rafter Hanger, 2 x 6 in Joist, 18 ga, Steel, ZMAXĀ® Galvanized
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
Simpson Strong-TieĀ® DWA3G2 Quik DriveĀ® Standard Adapter, For Use With DeWALTĀ® 969 Cordless, 267 and 268 Adjustable Torque Screwguns
Simpson Strong-TieĀ® DWA3G2 Quik DriveĀ® Standard Adapter, For Use With DeWALTĀ® 969 Cordless, 267 and 268 Adjustable Torque Screwguns
Recently Viewed
3/8"-24 SAE H3 SPIRAL FLUTE SHEER TAP - MCT34476>
IDEALĀ® Aqua-GelĀ® CW 31-298 Cable Pulling Lubricant, 1 qt Squeeze Bottle, Gel Form, Pink, 1.1
IDEAL Aqua-Gel CW non-toxic cable pulling lubricant features the same excellent qualities as IDEAL Aqua-Gel II, but with a lower temperature range for exterior use in cold weather conditions. It is polymer-based formula with a clear orange color that offers maximum tension reduction in high-stress electrical and communications cable-pulling operations. Clings to cable throughout long pulls and is well-suited for hand or poured applications. Lubricant dries to a semi-fluid film that won't clog conduit, and cleans up easily with soap/water. It remains temperature stable over a wide temperature range from-28Ā°F to 190Ā°F (-33Ā°C to 88Ā°C). It is acceptable with all cable types except composite rubber, and clings to cable throughout long pulls. It comes in a 1-quart squeeze bottle, 1-gallon bucket, and 5-gallon bucket. It is environmentally safe, non-toxic, non-flammable and non-corrosive for convenient use. For outdoor use only.
The Grey Pneumatic 1" Drive x 21mm Deep Socket (4021MD) is a premium impact socket designed for professional use. Crafted from high-quality chrome-molybdenum alloy steel, this socket offers exceptional durability and strength. Its deep length and 6-point design make it ideal for reaching recessed nuts and bolts and providing a secure grip. The 1" drive ensures compatibility with a wide range of impact wrenches and sockets.
KEY FEATURES AND BENEFITS:
Durable construction: Made from high-quality chrome-molybdenum alloy steel for long-lasting performance.
Deep reach: Ideal for accessing recessed nuts and bolts.
Secure grip: 6-point design provides a firm hold on fasteners.
Versatile compatibility: 1" drive fits a variety of impact wrenches and sockets.
Professional-grade quality: Engineered to meet the demanding needs of professional users.
SPECIFICATIONS:
Size: 21mm
Drive: 1"
Material: Chrome-molybdenum alloy steel
Design: Deep socket, 6-point
WHIRLPOOL OVEN ELEMENTS-BBC631414 >
The Grey Pneumatic 1/2" Drive x 23mm Extra-Thin Wall Deep Socket (2023MDT) is a high-quality impact socket designed for professional use. Its extra-thin wall construction makes it ideal for accessing bolts and nuts in tight spaces, while its 1/2" drive and 23mm deep design ensure compatibility with a wide range of impact tools and fasteners.
KEY FEATURES AND BENEFITS:
Extra-thin wall: Provides access to hard-to-reach areas.
1/2" drive: Compatible with most impact tools.
23mm deep: Accommodates a variety of bolt sizes.
6-point design: Offers a secure grip and prevents rounding of fastener corners.
Durable construction: Built to withstand demanding applications.
SPECIFICATIONS:
Drive size: 1/2 inch
Socket size: 23mm
Length: Deep
Wall thickness: Extra-thin
Points: 6
KleinĀ® 69131 Replacement Bulb, For Use With KleinĀ® 69133 Continuity Tester
Replacement bulb for Continuity Tester (Cat. No. 69133). The Continuity Tester quickly reveals shorts or broken circuits. Bulb provides long lasting performance.
